Ultra Light-Weld® Thermal Barrier Coating Mask

SpeedMask® 733-G-REV-A UV/Visible light curable masking resin is formulated to provide superior protection during thermal barrier coating, aggressive grit blast, shot peening, and plasma spray processes. Recommended surfaces include nickel alloys, super alloys, titanium, cobalt chrome, stainless steel, aluminum, and steel. This 100% organic resin cures quickly and is easily removed by incineration in an air furnace at a minimum temperature of 650°C [1200°F].

Download  733-G-REV-A Product Data Sheet     Download  Request SDS

SpeedMask Resins contain no nonreactive solvents and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax light-curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11/EC.

Viscosity (nominal):  25,000 cP

Shore Hardness:  D42

Modulus of Elasticity MPa [psi]:  193 [27,960]

Cure Time**:  10 seconds

Package Sizes Available*:
30 mL Syringe
160 mL Cartridge
300 mL Cartridge
550 ml Cartridge
15 Liter Tapered Pail

*In Europe materials are sold in g/kg not mL/L
**Cure time based upon Dymax 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
Thermal barrier coating
Aggressive grit blasting
Shot peening
Plasma spray

UV/Visible light curing
Green in appearance
Fast curing
Thixotropic gel
Reliable surface protection during TBC processes
Resilient to blasting media
ISO 10993-5