UVC-8 UV Curing Conveyor System

CE Marked - Available in Europe Only


The Dymax UVC-8 Conveyor is designed for curing UV/Visible light-curable adhesives, coatings, and inks. This cost-efficient and versatile conveyor system is perfect for both production and lab environments, and can be used in a number of different industries. Typical substrates that are bonded, coated, or encapsulated include paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.

Features

  • Fast cures for higher throughput - intensity up to 800 mW/cm2
  • Controlled and consistent cure times
  • Adjustable lamp-to-belt distance to accomidate various part heights
  • Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
  • Digital control panel, compact PLC
  • Optional intensity adjustment (40-100%)
  • Optional dichronic lamp reflectors and IR filters for curing on temperature-sensitive substrates are available

The UVC-8 Conveyor is equipped with a 220-mm wide Teflon®-coated belt and can be outfitted with one, two, or three UV lamps. The distance between the lamp and the belt can be manually adjusted (between 60-100 mm) as well as the belt speed (0.5-12 m/min). This enables the operator to tailor the curing conditions to the specific application. The conveyor also features a digital control panel where various parameters such as operating hours, lamp current, and the UV set point can be monitored.  

Download  Dymax UVC-8 Light-Curing Conveyor System Product Bulletin (European Version)
UVC-8 Conveyor System Specifications - Available in Europe Only
Maximum UVA Intensity1 800 mW/cm2
UVA Dose
(@ 1 m/min)
2,800 mJ/cm2
Lamp Type Focused Beam
Number of Lamps 1-3 Lamps
Illuminated Area
(one lamp)
Length - 200 mm
Width - 200 mm
Focal Length 50 mm
Belt Material 5 mm x 5 mm mesh Teflon®-coated fiberglass belt
Belt Width 220 mm
Belt Speeds Adjustable from 0.5 to 12 m/minute
Electrical Requirements 3 x 400V/N/PE, 50 Hz
Overall Dimensions
(L x W x H)
1,000 mm x 1,100 mm x 1,200 mm
Load and Unload Length 120 mm to max 450 mm
Vertical Clearance Adjustable from 60 to 100 mm
Net Weight 180 Kg
Part Numbers:

UVC-8 with Metal Halide Bulb (std)



UVC-8 with Mercury Bulb


UVC-8 with Gallium Bulb



Part Number: UVC-8 Request a quote


Part Number: UVC-8/Hg Request a quote


Part Number: UVC-8/GA Request a quote

Lead Time
(Not including shipping)
3-4 Weeks
Bulb Life/Warranty Typical life - 1,000 hours
Warranty - 700 hours
Replacement Bulb Part Numbers UVC-8bulb/Fe Metal Halide
UVC-8bulb/Hg Mercury
UVC-8bulb/Ga Gallium

1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer witha new bulb at a distance of 60 mm.

Images & Diagrams

UVC-8 UV Curing Conveyor System

UVC-8 UV Curing Conveyor System


UVC-8 UV Curing Conveyor System


UVC-8 UV Curing Conveyor System


UVC-8 UV Curing Conveyor System