UVC-5 UV Curing Conveyor System

CE Marked - Available in Europe Only


The Dymax UVC-5 Conveyor is designed for curing UV/Visible light-curable adhesives, coatings, and inks in a variety of different industries. This system is ideal for curing smaller parts and can cure materials applied to a variety of substrates including paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.

Features

  • Intensity up to 400 mW/cm2
  • Controlled and consistent cure times
  • High power lamp (910 or 800 W)
  • Adjustable lamp-to-belt distance (15 to 60 mm)
  • Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
  • 120-mm wide Teflon®-coated belt with adjustable speed (2-26 m/min. range)
  • Two bulb options, Fe or Hg

The UVC-5 Conveyor is equipped with a 120-mm wide Teflon®-coated belt and one UV lamp. The distance between the lamp and the belt can be manually adjusted (between 15-60 mm) as can the belt speed (2-26 m/min). This enables the operator to tailor curing conditions to specific application requirements. The conveyor also features a counter to track hours of operation, an electric control unit located in the transportation device, and an air-cooled casing with an aluminum reflector for the bulb.

Download  Dymax UVC-5 Light-Curing Conveyor System Product Bulletin (European Version)
UVC-5 Conveyor System Specifications - Available in Europe Only
Maximum UVA Intensity1 400 mW/cm2
UVA Dose
(@ 1 m/min)
1,800 mJ/cm2
Lamp Type Focused Beam
Number of Lamps One
Illuminated Area
(one lamp)
Length - 100 mm
Width - 120 mm
Focal Length 40 mm
Belt Material 5 mm x 5 mm mesh Teflon®-coated fiberglass belt
Belt Width 120 mm
Belt Speeds Adjustable 2 to 26 m/minute
Electrical Requirements 230 VAC, 50 Hz, 5.9A (single phase)
Overall Dimensions
(L x W x H)
700 mm x 369 mm x 299 mm
Load and Unload Length 90 mm
Vertical Clearance Adjustable from 15 to 60 mm
Net Weight 20 Kg
Part Numbers:

UVC-5 with Metal Halide Bulb (std)



UVC-5 with Mercury Bulb



Part Number: UVC-5 Request a quote


Part Number: UVC-5/Hg Request a quote

Lead Time
(Not including shipping)
2-3 Weeks
Bulb Life/Warranty Typical life - 1,000 hours
Warranty - 750 hours
Replacement Bulb Part Numbers UVC-5bulb/Fe Metal Halide
UVC-5bulb/Hg Mercury

1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer with a new bulb at a distance of 60 mm.

Images & Diagrams

UVC-5 UV Curing Conveyor System

UVC-5 UV Curing Conveyor System


UVC-8 UV Curing Conveyor System


UVC-8 UV Curing Conveyor System