The WIDECURE® conveyor system is designed to offer consistent, fast, and safe curing. Equipped with a 25”-wide belt, this system is ideal for curing light-curable materials on larger parts, or larger quantities of smaller parts. It can be outfitted with either a longwave (metal halide, UVA/Visible) bulb or a shortwave (mercury, UVB/UVC) bulb and delivers up to 700 mW/cm2 of curing energy.
Designed to help manufacturers build a more reliable cure process, the WIDECURE® allows users to easily control various curing parameters through a touch-screen control panel. This feature gives users greater curing flexibility and enables them to tailor the curing conditions to their specific application. The system’s tightly controlled belt speed and minimal bulb degradation also allow better control over cure. This provides repeatable curing profiles and a more reliable process with less risk of variance.
- Consistent UV curing
- Complete UV shielding
- Touch screen control panel
- 4" to 24" adjustable lamp to belt height
- Integral cooling and vacuum hold-down
- 4 to 30 ft/min., adjustable in 0.1 ft/min. increments
- >700 mW/cm2
|WIDECURE® UV Light Curing Conveyors Product Bulletin|
|WIDECURE® UV Light Curing Conveyor Systems Operations Manual|
|Dymax Light-Curing Equipment Selector Guide|
Take advantage of the opportunity to evaluate our light curing systems for two weeks free of charge through our Try-and-Buy program.
|WIDECURE Conveyor System Specifications|
|Maximum UVA Intensity
|700 mW/cm2 at 4"|
|Maximum UVA Energy
(320-395 nm) @ 5 fpm
|Line Speed||4-30 fpm|
|Width of Illuminated Area||24"|
|System Power||480 VAC, 3Ø, 60 Hz, 25 Amp.|
|Vertical Clearance||Adjustable 4" to 24"|
|Overall Dimensions||113.5" L x 46" W x 76" H
[288.3 cm x 116.8 cm x 193 cm]
Standard 25" UV Conveyor
(Belt Travels Left-to-Right)
41245-L Request a quote
|Modified 25" UV Conveyor
(Belt Travels Right-to-Left)
|41245-R Request a quote
Note: this model requires modification charge and additional lead-time.
|Bulb Life||750+ hours with less than 20% degradation (typical)|
|Replacement Parts||41248 Replacement Belt
41247 Metal Halide (Standard)
41246 Mercury (Optional)*
*These bulbs are primarily designed for curing UV inks and cationic epoxies.
Images & Diagrams