Acid Strip and Thermal Spray Coating Mask with Heat Cure

SpeedMask® 706-H UV-curable masking resin is formulated to provide excellent surface and internal cavity protection during acid stripping, air plasma strap operations of turbine components during acid stripping, APS coatings, and machining operations. This resin is specially formulated to cure with heat in applications where shadowed areas exist.

Download  706-H Product Data Sheet     Download  Request SDS

Dymax materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11/EC.

Viscosity (nominal):  30,000 cP

Shore Hardness:  D75

Modulus of Elasticity MPa [psi]:  900 [130,000]

Cure Time**:  20 seconds

Package Sizes Available*:
30 mL Syringe
300 mL Cartridge
1 WM Liter Bottle

*In Europe materials are sold in g/kg not mL/L
**Cure time based upon Dymax 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
Acid Stripping
Air plasma spray

Recommended surfaces include nickel alloys & high-temperature steel

UV/Visible light curing
Secondary heat cure
High adhesion
Resists acids
High adhesion
Thixotropic gel
High viscosity