Multi-Cure® Adhesive for Phenolic & Filled Plastics, Glass, and Metal

Multi-Cure® 6-621 adhesive is designed for rapid assembling of parts made of metal, glass, ceramic, phenolic, filled polyamide, and other substrate materials. Multi-Cure 6-621 adhesive is specially formulated to cure with heat in applications where shadowed areas exist. Multi-Cure products can be cured with UV/Visible light, heat, or pre-applied activator. Visible light can penetrate through many UV-blocked and colored plastics and glasses to cure the adhesive.

Download  6-621 Product Data Sheet     Download  Request SDS

Dymax materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.

Viscosity (nominal):  800 cP

Tensile at Break:  4,000 psi  (28 MPa)

Metals; Glass; Ceramic; Polyamide (filled/unfilled); Phenolic plastics

Package Sizes Available*:
10 mL Syringe (MR)
30 mL Syringe (MR)
160 mL Cartridge
1 Liter Bottle
15 Liter Tapered Pail
*In Europe materials are sold in g/kg not mL/L
Metal-to-glass bonding
Coil winding

UV/Visible light curing
Secondary heat cure
Activator cure
Bonds multiple substrates
Hard and clear bonds