Dymax 535-A adhesive activator, when pre-applied to metal, painted/coated metal, plated and surface treated metal, ferrite, ceramic, glass, wood, and thermoset plastic substrates rapidly and completely cures high-strength Dymax industrial 600 series and 800 series structural adhesives. For most bonding applications, activator is applied to one bonding surface and adhesive to the other. The activator material may be applied by spraying, dipping, brushing, or pad transfer. Long pre-applied open times are available.
» Read more on complimentary products to 535-A Adhesive Activator:
|535-A Product Data Sheet||Request SDS|
535-A adhesive activator is an environmentally safe, completely free of ozone depleting chemicals (ODCs) activator that enhances safety in the workplace and has excellent degreasing and wetting properties. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.
Flash Point (Closed Cup): 57°F
Specific Gravity: 0.9
Package Sizes Available*:
8.3 mL Vial
16 Ounce Can
1 Quart Can
1 Gallon Can
5 Gallon Can
Used with Dymax structural bonding adhesives for increasing bond strength to metal, painted/coated metal, plated and surface treated metal, ferrite, ceramic, glass, wood, and thermoset plastic substrates
Fast strong structural bonds
Excellent degreasing and wetting properties
Fixtures in seconds
Long pre-applied open times available
Compare Dymax UV/Visible Light-Curing Spot Lamps
Dymax spot-curing systems provide very high intensity (3,000-8,000 mW/cm2 (320-395 nm)) over a small area (typically <½", 5 mm diameter). These intensities usually result in a 0.5-5 second cure time. Dymax spot-curing systems utilize an integral timed/manual shutter and typically require little external shielding. An intensity adjustment feature aids users in both validating and controlling a UV light-curing process.
Spot lamp systems are ideal for curing small areas quickly and can be easily integrated into an automated assembly process or used as a turnkey bench-top system.
2 As measured through a 5-mm liquid lightguide with a Dymax ACCU-CAL™ 50 radiometer (320-395 nm)
3 As measured through a 5-mm liquid lightguide with a Dymax ACCU-CAL™ 50 LED radiometer
Compare Dymax UV/Visible Light-Curing Flood Lamps
Dymax UV light-curing flood-lamp systems offer moderate to high intensity (75-225 mW/cm2) over a large area (5" x 5" or 8" x 8" (127 mm x 127 mm or 203 mm x 203 mm)). These lamps are ideal for curing areas larger than ½" (12.7 mm) in diameter or curing many small parts simultaneously.
Dymax UV light-curing flood-lamp systems can be incorporated into conveyors, automated assembly systems, or used as turnkey bench-top units.
1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer.
Compare Dymax UV/Visible Light-Curing Conveyor Systems
Dymax conveyors incorporate either flood or focused-beam curing systems. The benefits of light-curing conveyors include consistent cure times and the ability to cure larger parts. Another benefit of conveyors is that they completely shield operators from UV light. Dymax conveyors have 12" wide belts, and can be configured for 6" and 12" width curing. Conveyor speed is tightly controlled and typically ranges from 1-27.5 feet per minute (although faster conveyors are available). Dymax light-curing conveyors can be outfitted with different types of lamps and up to four lamps on a single conveyor.
1These conveyors require 120 volts. 230 volt conveyors are also available.