Dymax MD® Medical Device Adhesive 1405-M-UR-SC is designed to be cured with either 385 nm or 405 nm UV wavelength light sources for very fast bonding of multiple substrates typically used in the manufacture of medical device assemblies. The blue color of Dymax See-Cure products disappears fully when the bond line has been exposed to the proper amount of energy. This product also fluoresces bright red under low-intensity "black" light (365 nm). The bright red fluorescence contrasts extremely well on plastics that naturally fluoresce blue in color (like PVC), and greatly assists with visual inspection of the bond line post cure. 1405-M-UR-SC is formulated with Encompass™ technology which incorporates Dymax exclusive See-Cure color change and Ultra-Red™ fluorescing technologies into one light-curable product. Bondable substrates include stainless steel, PC, PMMA, FR4, and ABS.
|1405-M-UR-SC Data Sheet||Request SDS|
Dymax MD® Medical Device adhesives are solvent free and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for medical device assembly. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11/EC.
Watch 1405-M-UR-SC Used in a High-Speed Needle-Bonding Application
Shore hardness: D70
Elongation at break: 150%
Stainless Steel; PC; PMMA; FR4; ABS
Package Sizes Available*:
10 mL Syringe
30 mL Syringe
160 mL Cartridge
1 Liter Tall Cylinder
15 Liter Straight-Sided Pail
*In Europe materials are sold in g/kg not mL/L
Winged infusion sets
Point of care devices
Adheres to stainless steel, PC, PMMA, FR4, and ABS
UV/Visible light cure
385 - 405 nm LED cure
Formulated with Encompass™ technology
Deeper section cure
Blue-to-colorless color change upon cure
Low viscosity for tight tolerance applications
ISO 10993-5 tested
Compare Dymax UV/Visible Light-Curing Spot Lamps
Dymax spot-curing systems provide very high intensity (3,000-8,000 mW/cm2 (320-395 nm)) over a small area (typically <½", 5 mm diameter). These intensities usually result in a 0.5-5 second cure time. Dymax spot-curing systems utilize an integral timed/manual shutter and typically require little external shielding. An intensity adjustment feature aids users in both validating and controlling a UV light-curing process.
Spot lamp systems are ideal for curing small areas quickly and can be easily integrated into an automated assembly process or used as a turnkey bench-top system.
2 As measured through a 5-mm liquid lightguide with a Dymax ACCU-CAL™ 50 radiometer (320-395 nm)
3 As measured through a 5-mm liquid lightguide with a Dymax ACCU-CAL™ 50 LED radiometer
Compare Dymax UV/Visible Light-Curing Flood Lamps
Dymax UV light-curing flood-lamp systems offer moderate to high intensity (75-225 mW/cm2) over a large area (5" x 5" or 8" x 8" (127 mm x 127 mm or 203 mm x 203 mm)). These lamps are ideal for curing areas larger than ½" (12.7 mm) in diameter or curing many small parts simultaneously.
Dymax UV light-curing flood-lamp systems can be incorporated into conveyors, automated assembly systems, or used as turnkey bench-top units.
1 Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer.
Compare Dymax UV/Visible Light-Curing Conveyor Systems
Dymax conveyors incorporate either flood or focused-beam curing systems. The benefits of light-curing conveyors include consistent cure times and the ability to cure larger parts. Another benefit of conveyors is that they completely shield operators from UV light. Dymax conveyors have 12" wide belts, and can be configured for 6" and 12" width curing. Conveyor speed is tightly controlled and typically ranges from 1-27.5 feet per minute (although faster conveyors are available). Dymax light-curing conveyors can be outfitted with different types of lamps and up to four lamps on a single conveyor.
1These conveyors require 120 volts. 230 volt conveyors are also available.