Multi-Cure® Light-Curable Medical Device Adhesive

Dymax 1128A-M Multi-Cure® UV and visible light curing medical device adhesive with secondary heat cure capability cures upon exposure to UV and/or visible light. 1128A-M adhesive is specially formulated to cure with heat in applications where shadowed areas exist. 1128A-M adhesive is designed for rapid bonding of metals typically used in the manufacture of medical devices. This product fluoresces blue for in-line inspection under low-intensity "black" light (365 nm). Bondable substrates include stainless steel, aluminum, glass, ABS, PA, PU, and nickel titanium.

Download  1128A-M Product Data Sheet    Download  Request SDS

Dymax MD® Medical Device adhesives are solvent free and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for medical device assembly. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.

Viscosity:  600 cP (nominal)

Cured Properties:
Shore hardness: D80
Elongation at Break: 13%

Recommended Substrates:
Stainless Steel; Aluminum; Nickel Titanium; Glass; ABS; PA; PU

Package Sizes Available*:
10 mL Syringe
30 mL Syringe
160 mL Cartridge
1 Liter Cylinder
15 Liter Tapered Pail
*In Europe materials are sold in g/kg not mL/L
Metal bonding; Needle bonding; Heat exchanger assembly; Adheres to stainless steel, aluminum, glass, nickel titanium, ABS, PA, and PU

Solvent free
Fast UV/Visible light cure
Secondary heat cure capability
Blue fluorescing
Impact resistant
ISO 10993 tested