|
NEWS FLASH! DYMAX BlueWave® LED System Now CE Marked for Global Distribution
The BlueWave® LED visible light, high-intensity spot-curing system from DYMAX Corporation offers many advantages over traditional UV spot-curing systems including no bulbs to change, cool cures, no warm-up, and constant intensity for thousands of hours. Now this popular system is CE marked, making it available globally. Read more...
NEW! New Gasketing Resin for PLASTICS - Moisture-Resistant
DYMAX Corporation is pleased to introduce a new tack-free, soft gasket material for sealing fuel cells, appliance housings, and critical electronic assemblies and devices. Light Weld® GA-140 is a UV/Visible light-curable form-in-place (FIP) and cure-in-place (CIP) gasket developed for applications requiring low compression set, tack-free surface, and durable, reliable sealing. It is a soft gasket material with high adhesion to plastics which provides a barrier to prevent absorption or penetration of air, dust, moisture, liquids and gaseous substances. Read more...
NEW! New Moisture-Resistant Gasketing Resin from DYMAX
DYMAX Corporation introduces a new moisture-resistant gasketing resin for sealing electrical conduit boxes, appliance housings, and critical electronic assemblies and devices. Ultra Light-Weld® GA-111 is a UV/Visible light-curable form-in-place (FIP) gasket developed for applications requiring low compression set, tack-free surface, and durable, reliable sealing. Learn more...
NEW! DYMAX Introduces New Fluorescing Light-Curing Needle Bonding Adhesive
DYMAX Corporation introduces a new light-curing adhesive for bonding needles, syringes and other stainless steel cannula. MD® Medical Device Adhesive 1162-M is low viscosity for quick, air-free dispensing into needle hub cavities. DYMAX 1162-M bonds stainless steel cannula to polycarbonate, PVC, glass, and polypropylene hubs. It produces clear bonds that exceed pull forces of other available adhesives in various needle bonding applications. Read more...
Go to Needle Bonding and Syringe Assembly Adhesives
NEWS FLASH! Mr. Terrence Woldorf Joins DYMAX Corporation's Sales & Marketing Team
DYMAX Corporation, world-leading manufacturer of advanced light-curing adhesives, coatings, and curing equipment, is pleased to announce the addition of Terry Woldorf to the Sales and Marketing Team. As Chief Growth Officer/Sr. Vice President of Global Sales and Marketing, Mr. Woldorf will focus on developing, implementing and monitoring programs to ensure fulfillment of customer and DYMAX expectations for adhesives and curing equipment in the marketplace. He will be responsible for overseeing the Americas’ Sales Team, Market Segment Managers, Light-Curing Equipment, Marketing Communications, Customer Service and Support Teams. Read more...
NEWS FLASH! DYMAX Partners With Partner Pak
DYMAX Corporation of Torrington, CT, and PARTNER PAK, INC. of Huntington Beach, CA, announce that today they entered into an exclusive supply and support agreement for the plastic clamshell and blister packaging marketplace. PARTNER PAK has long been an innovator for this industry by designing machinery, robotic automation, clamshells, blisters, and the patented ClamCard®. These innovations minimize labor costs and provide environmentally-friendly results. DYMAX is a pioneer and market leader in light-curing chemistries and light-curing equipment used in such varied industries as medical disposables, glass assembly, electronic circuit protection and ruggedizing, aerospace, and automotive component assembly. Read more...
NEW! Conformal Coating from DYMAX Meets MIL-I-46058C and IPC-CC-830B Requirements
DYMAX Conformal Coating Multi-Cure® 987 has met the requirements of MIL-I-46058C and IPC-CC-830B. Multi-Cure®
987 is specifically formulated for rapid
room temperature cure when exposed to UV and/or visible light. Read more...
DYMAX Announces New Medical Market Segment Manager
Mr. Kyle Rhodes has been appointed the new DYMAX Medical Market Segment Manager. Mr. Rhodes will perform a key role in helping manufacturers in the medical and plastic assembly markets maximize process efficiencies by... Read more...
NEWS FLASH! Get Cool, Consistent, Visible Light Curing with New DYMAX BlueWave® LED System
The new BlueWave® LED visible light, high-intensity spot curing system offers many advantages over traditional UV spot curing systems including... no bulbs to change, cool cures, no warm-up, and constant intensity for thousands of hours. Learn more... View product information
New Sales Engineer Joins the DYMAX Team
DYMAX Corporation is pleased to announce the appointment of Rob Kleinschmidt as a Sales Engineer in the Field Sales Department. He will play a key role in developing accounts and generating sales in the New England area and surrounding states. Read more...
NEWS FLASH! Seeing is Believing! See It Change - See It Cure!
DYMAX has answered the two most often asked questions in the adhesives industry. How can I tell where an adhesive has been applied? How do I know it's cured? DYMAX adhesives formulated with new, revolutionary See-Cure™ color-change technology start out bright blue in their uncured state, making them very visible when dispensed onto substrates. Then, to ensure the adhesive is completely cured, the color changes from blue to clear 15-25% slower than the adhesive cures, providing a critical safety feature for manufacturing processes. Read more...
NEWS FLASH! DYMAX Advances the Development of Light and Moisture Cure Conformal Coatings
DYMAX Corporation, the leader in light-curing technology for electronic materials, announces the release of its newest product offering for conformal coatings. Dual-Cure™ 9481 represents the latest advancement in light/moisture cure technology. Historically, light-cured conformal coatings have been most successful in applications with no or minimal shadowing. Shadow areas, which can inhibit the access of light, have the potential to hold or trap the conformal coating and perhaps limit the light exposure of the materials. Typically, it was necessary to add the ability to thermally cure a conformal coating in order to cure in light-blocked areas. DYMAX Dual-Cure 9481 is a step forward. Read more... Visit Dual-Cure.com
NEWS FLASH! Ultra-Red™ Fluorescing Technology Enables Accurate Bond-Line Inspection and Product Verification
Seeing red? You should be! DYMAX has introduced Ultra-Red™ fluorescing technology. Many plastics naturally fluoresce blue under UV light – this minimizes the inspection advantages of using blue-fluorescing adhesives in parts assembly. Ultra-Red fluorescing adhesives from DYMAX remain naturally clear until exposed to UV light, at which point they fluoresce bright red providing a vivid contrast that permits accurate bond-line inspection. The red fluorescence does not absorb the same light energy wavelengths as those used to cure the adhesive, resulting in faster and deeper cures when compared with the same adhesives containing blue fluorescence.
Read more...
NEW! 180° Curing With the New DYMAX UVCS SideCure™ Conveyor System.
When the job calls for 180° curing, the new DYMAX UVCS SideCure™ conveyor system is the equipment you need! Designed for UV curing of DYMAX adhesives and coatings from the left, right, and/or top, the SideCure conveyor can be outfitted with up to eight DYMAX 5000-EC UV curing flood lamps. The conveyor’s 12" wide belt and 7.5" vertical clearance, with 5" high side-curing capability, allows for the curing of large parts and makes the SideCure a very versatile UV curing solution. In addition, the relatively small conveyor size – 51" x 30" x 21.5" – minimizes the footprint required for UV curing.
Read more... Go to UVCS SideCure™ Conveyor
NEWS FLASH! Check Out Our Updated Medical Device Adhesives Pages
Corporate Community Involvement
Students from Oliver Wolcott Technical High School visit DYMAX Corporation. Read more...
NEW LITERATURE:
Click on the literature titles below to download PDF versions. To receive a pre-printed copy, e-mail your request to info@dymax.com.
NEW! Lit210 - BlueWave® LED Visible Light Spot Curing System Product Bulletin
NEW! Lit199 - See-Cure™ Adhesive Technology - See it Dispense. See it Cure. See the Solution! Informational Flier
NEW! Lit198 - Ultra-Red™ Fluorescing Adhesive Technology - Seeing Red? You Should Be! Informational Flier
NEW! Lit198E - Ultra-Red™ Fluorescing Adhesive Technology - Seeing Red? You Should Be! Informational Flier - Electronics Materials Version
NEW EMPLOYEES, PROMOTIONS and COMPANY NEWS
DYMAX Welcomes:
Jennifer McAdam joins Marketing as a Marketing Communications Specialist
Terry Woldorf joins Sales and Marketing as Chief Growth Officer/Senior Vice President of Global Sales and Marketing
Sascha Henke joins Applications Engineering at DYMAX Europe as a Project Engineer
Diana Cavallo joins Marketing Communications as the Web Production Assistant
Rob Kleinschmidt joins Field Sales as a Sales Engineer
Kyle Rhodes joins the Marketing Department as the Marketing Segment Manager - Medical
Gary Zubricky joins the Marketing Department as the Product Line Manager - Equipment
Promotions:
Melissa Jacquette has been promoted to the position of Jr. Executive Assistant to the President
Willow McGurk has assumed the position of Senior Accountant
Andrew Lovell will be assuming the position of Continuous Process Improvement Analyst
Dr. Detlef Heindl has been promoted to Chief Technology Officer
NEWSLETTER
NEWS FLASH! Read our Summer 2008 Light Lines E-Newsletter
If you would like to receive the DYMAX Light Lines E-newsletter publication, please subscribe here and you will be added to our mailing list. You may unsubscribe at anytime.
Click here to see all archived DYMAX Light Lines Newsletters.
NEW EVENTS
Click here to see Up Coming Events.
NEW PRESS RELEASES
P178 - DYMAX BlueWave® LED System Now CE Marked for Global Distribution
P168 - New Gasketing Resin for PLASTICS - Moisture-Resistant
P167 - New Moisture-Resistant Gasketing Resin from DYMAX
P170 - DYMAX Introduces New Fluorescing Light-Curing Needle Bonding Adhesive
P171 - DYMAX Partners with Partner Pak
P169 - Mr. Terrence Woldorf Joins DYMAX Corporation's Sales & Marketing Team
P165 - New Conformal Coating Meets MIL-I-46058C and IPC-CC-830B Requirements
P161 - DYMAX Announces New Medical Market Segment Manager
P164 - Get Cool, Consistent, Visible Light Curing with New DYMAX BlueWave® LED System
P163 - Rob Kleinschmidt Joins DYMAX as Sales Engineer
P153 - DYMAX Advances the Development of Light and Moisture Cure Conformal Coatings
P159 - See it Dispense. See it Cure. See the Solution. DYMAX Introduces See-Cure™ Technology
P160 - 180° Curing With the New DYMAX UVCS SideCure™ Conveyor System
P158 - Ultra-Red™ Fluorescing Technology Enables Accurate Bond-Line Inspection and Product Verification - General
P155 - DYMAX Corporation Recognized as One of the Fastest-Growing Companies in the U.S.
P147 - Ultra-Red™ Fluorescing Technology Enables Accurate Bond-Line Inspection and Product Verification - Medical
All DYMAX archived press releases
|