Technical Support |
|
Adhesive selection, process development, and product validation are critical to the success of any manufacturing process. DYMAX is dedicated to helping industrial manufacturers find the correct adhesive and appropriate dispensing and curing equipment for their application. Our team of Applications Engineers is available to assist manufacturers with product and process design, testing, evaluation and pre-production trials.
The Applications Engineering lab can perform comprehensive bonding studies for manufacturers who are contemplating assembly with UV light curing adhesives. Laboratory testing is performed using the manufacturer’s actual components on material samples. A summary report is returned to the manufacturer, along with bonded components for final evaluation.
DYMAX adhesive testing capabilities include:
- Adhesive Recommendation
- Test Reports
- Parts Assembly
- Cure Time Recommendation
- Light Transmission
- Biocompatibility Testing
- Heat Aging
- Thermal Cycling
- Tensile/Shear Testing
- Elongation at Break Testing
- Modulus Testing
- Humidity Aging
- Water Absorption Testing
|
 |
When testing indicates that our library of over 3,000 formulations does not contain a suitable adhesive solution, we often custom formulate a solution to fit the specific requirements of the manufacturer’s application. |
|
CLICK HERE for adhesive samples
For assistance with your adhesive selection or
process development questions, send your support request by email or
contact our Applications Engineering Group directly at 860-626-6799.
Do you need a custom product to fit your application? Fill out our Custom Formulations Questionnaire.
Evaluate UV/visible curing in your lab or plant FREE OF CHARGE
using the DYMAX UV/Visible light curing Equipment Trial Rental/Lease Program.
|
SpeedMask® products are sold on a direct basis and through authorized
SpeedMask distributors only. Contact us to locate a
DYMAX representative near you.
|
|
