UV Curable Optical Adhesives |
|
DYMAX low-stress, low-movement, light-curable optical adhesives cure in seconds to provide the strength and clarity of epoxies. Optically clear, high-tensile-strength bonds of 3,000 psi and shrinkage as low as 0.1% are possible.
- UV/Visible light cure in seconds
- Optically clear adhesive with excellent light transmission properties
- High strength optical adhesive
- Low stress optical adhesive
- Solvent free
- Low shrinkage and low outgassing properties, result in no movement during cure
- One component, no mixing is required
UV curable optical adhesives for optical assembly and lens bonding include grades for VCSEL potting, lens fixturing, lens laminating, lens positioning, and fiber-optic assembly. DYMAX optically
clear adhesives feature low-shrink, low-stress characteristics, are single component, and exhibit gap filling to 1/4".
OP series UV/Visible light cure optical adhesives are ideal for optical assembly applications such as lens
and optical mounting and the attachment of ceramic, glass, quartz, metal, and plastic components.
|
 |
UV Curable Optical Adhesives Selector Guide |
|
Click on the product number below for additional information. |
|
| Optical Adhesive |
Application |
Features |
OP-4-20632
OP-4-20632-GEL |
Light path, lens positioning, optical assembly |
High optical clarity; tenacious adhesion to glass and metal; low shrink on cure; Tg increases with heat exposure; moisture resistant
optical adhesive; resists yellowing |
|
| OP-24-REV-B |
Bonding glass lenses to metal fixtures or backings |
Multi-cure; tack and bond with light, heat, or DYMAX 501-E activator; impact resistant; opaque; bonds to Phenolic, ABS, glass, and metal
|
|
| OP-29 Series |
Tacking, bonding, potting, sealing, and laminating |
Multi-purpose; optically clear; resilient; low stress optical adhesive; resists yellowing, thermal shock, vibration, and impact; bonds glass, metal, and plastics; ideal for large or small areas
|
|
| OP-67-LS |
Optical assembly alignment where minimal or no movement is required |
High strength positioning; low outgassing optical adhesive; low shrinkage; no movement during cure or thermal excursions; complete cure in seconds; bonds to metal, glass, ceramic, FR-4, and polycarbonate
|
|
|
|
Max says if you don't see an optical adhesive that suits your
optical assembly and optical mounting application, call DYMAX Applications Engineering for a recommendation.
|
