SPEEDMASK Temporary UV Curable Masking Resins for Medical Devices

SPEEDMASK®
Temporary UV Curable Masking Resins for Medical Devices
Replace Tape, Wax, Lacquers and Fixtures

Mask and seal all components in one step! DYMAX SPEEDMASK® UV curable medical masking resins are residue-free and offer reliable protection during most metal finishing processes. SPEEDMASK UV curable masking resins replace tape, wax, lacquers and fixtures and can seal and protect machined, ground or polished surfaces during tumbling, peening, abrading or cleaning. Solvent-free UV curable masking resins can be applied and UV cured in seconds, are easy to incorporate into automated systems and help reduce labor, rework and scrap. SPEEDMASK UV curable masking resins peel at room temperature, dissolve in water and leave no residue behind. SPEEDMASK UV curable medical masking resins are ideal for use on orthopaedic implants such as knee replacements and hip stems, surgical instruments and medical devices.

Spray Mask - Cure - Peel - SpeedMask® Temporary Masking Resins

Click here to request your free uv curable masking resins consultation


SPEEDMASK
UV curable masking resins are sold on a
direct basis & through authorized SPEEDMASK distributors only.

Download our SPEEDMASK Medical UV Curable Masking Resins Selector Guide

Download our SpeedMask UV Curable Masking Resins Selector Guide (251 KB)

Selector Guide (click on the product number to register to download a PDF version of the Product Data Sheet)

Resin Applications Features & Benefits
PEELABLE MASKANTS (Peels easily at room temperature or after warm water soak, 120°F - 150°F) UV Curable
7108-Gel Grinding, peening, tumbling, polishing, grit blasting and electropolishing Low adhesion; easy manual peel off; non-slumping
7108-S Grinding, peening, tumbling, polishing, grit blasting and electropolishing Low adhesion; easy manual peel off; ideal for spray mask application
7108-SR Grit blasting, shot peening, part handling, polishing Moderate adhesion; red in color; easy to remove
7111 Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, electropolishing and passivating Higher adhesion; peels off easily after warm water soak
7112 Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, electropolishing and passivating Higher adhesion; peels off easily after warm water soak; ideal for spray mask applications
7112-R Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, electropolishing and passivating Higher adhesion; peels off easily after warm water soak; ideal for spray mask applications; red in color
7116 Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, anodize coating, electropolishing and passivating Plating solution resistant; aggressive grit blast resistant; peels off easily after hot water rinse; leaves no residue
7117 Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, anodize coating, electropolishing and passivating Plating solution resistant; aggressive grit blast resistant; peels off easily after hot water rinse; leaves no residue; spray mask, brush or dip to apply
7117-R Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, anodize coating, electropolishing and passivating Plating solution resistant; aggressive grit blast resistant; peels off easily after hot water rinse; leaves no residue; spray mask, brush or dip to apply; red in color
7124 Grinding, peening, tumbling, polishing, grit blasting, plating, hardcoating, anodize coating, electropolishing and passivating Moderate adhesion; easy to remove from bead and pore coated surfaces; leaves no residue
7126 TBD Chemical and heat resistant
7127 TBD Trimmable; spray mask or dip applications
WATER SOLUBLE MASKANTS (Washes off with hot water spray or agitated bath, 140°F-180°F) UV Curable
7113-Gel Grinding, peening, tumbling, polishing, grit blasting Easy, automated removal; no heat or manual labor required; for use where parts cannot be exposed to high temperatures

 

Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC

 

Hip stem unmasked and masked with DYMAX water soluble UV curable masking resin
Hip stem unmasked and masked
with DYMAX water soluble
UV curable masking resin

Knee implants unmasked and masked with DYMAX peelable UV curable masking resin
Knee implants unmasked and
masked with DYMAX peelable UV
curable masking resin

 

UV Light Curing Spot, Flood and Conveyor Systems

SPEEDMASK Temporary UV Curable Masking Resins for Medical Devices


Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering
for a recommendation.  We have a library of over 3,000 adhesive formulations to choose from!
DYMAX Corporation 318 Industrial Lane

DYMAX Corporation  |  318 Industrial Lane  |  Torrington, CT 06790  |  ISO 9001:2000 Certified
Phone: (860) 482-1010  |  Fax: (860) 496-0608  |  E-mail: info@dymax.com
©2007 DYMAX Corporation  |  Search Engine Optimization by Service Internet Solutions
69.20.85.128