SPEEDMASK® Temporary UV Curable Masking Resins
Aerospace, Power Generation and Metal Finishing

DYMAX SPEEDMASK® uv curable masking resins replace tape, wax, lacquers and fixtures and offer reliable protection against most metal finishing processing environments. The tenacious adhesion of SPEEDMASK UV curable maskants seals and protects machined, ground, or polished surfaces during tumbling, peening, abrading or cleaning processes. Grinding and peening UV curable maskants eliminate external damage to edges and surfaces and internal cavity FOD. UV curable SPEEDMASK resins also seal cooling cavity openings and prevent contamination of blade and vane cooling holes and cores from acid, alkaline and plating solutions, as well as the debris from air plasma spray, HVOF, peening and grit blasting. DYMAX UV curable masking resins, uv curing lamps and uv accessories simplify regulatory compliance, and bring efficiency and cost reduction to new parts manufacturing, overhaul and repair, turbine and metal finishing. Clean burn-off grades and peelable and water soluble uv curable masks are available.

Spray Mask - Cure - Peel - SpeedMask® Temporary Masking Resins

Click here to request your free uv curable masking resins consultation


SPEEDMASK UV curable masking resins are sold on a
direct basis & through authorized SPEEDMASK distributors only.
Download our SpeedMask UV Curable Masking Resins Selector Guide

Download our SpeedMask UV Curable Masking Resins Selector Guide (251 KB)

Selector Guide (click on the product number to register to download a PDF version of the Product Data Sheet)

Resin

Applications

Features

HIGH ADHESION, BURN-OFF GRADES (Incinerate cleanly at 1200° in air furnace) UV Curable Masking Resins
703 Spray mask applications including cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; electroplating Resists HCL and other acids/alkalis; cures to ¼” deep; tough bonds; machines and abrades cleanly
706 Cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; electroplating; air/electron beam plasma spray mask Gel; hard, matte finish; deep curing
706-H Cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; YAG and CO2 laser drilling maskant Cures in shadow areas and with UV light and 300°F thermal
707 Cooling cavity sealant; grinding maskant; YAG and CO2 laser drilling maskant Low viscosity; protects from beam impingement; cures in shadowed areas
718 Cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; electroplating Resistant to APS and HVOF coating processes
718-Gel Grinding maskant; air/electron beam plasma spray mask High adhesion; non-slumping
720 Cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; electroplating Highest adhesion; translucent color; acid resistant
722 Cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; electroplating; air/electron beam plasma spray mask Non-slumping; leaves no residue; resistant to chemical processing

PEELABLE MASKS Peel easily at room temperature or with mild heat (120°F-150°F) UV Curable Masking Resins
708 McrAly and TBC feature protection; airfoil edge protection; cooling cavity sealant Low adhesion; manually peel off
708-Gel McrAly and TBC feature protection; airfoil edge protection; cooling cavity sealant; cold airflow testing mask Non-slumping gel; manually peel off
708-S Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; McrAly and TBC feature protection; airfoil edge protection during manufacturing and transportation Low adhesion; easy manual peel off; ideal for spray mask applications
708-SR Cooling cavity sealant; TBC feature protection Red in color
711 TBC feature protection; airfoil edge protection; cooling cavity sealant; cold airflow testing mask Higher adhesion
712 Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; hardcoat maskant Higher adhesion; ideal for spray mask application; peels easily
712-R Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; hardcoat maskant Same as 712; red in color for greater visibility
716 Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; electroplating; anodize coating maskant Plating solution resistant; aggressive grit blast resistant; leaves no residue
717 Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; electroplating; anodize coating maskant Spray mask, brush or dip to apply; peels off easily
717-R Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; electroplating; anodize coating maskant Same as 717; red in color for greater visibility
722 Cooling cavity sealant; grinding maskant; acid (HCL) stripping maskant; electroplating; air/electron beam plasma spray mask Non-slumping; leaves no residue; resistant to chemical processing
723-Gel Cooling cavity sealant; grinding maskant; peening maskant Similar to 723-R; clear in appearance
723-R Cooling cavity sealant; grinding maskant; peening maskant; grit blast maskant; electroplating; hardcoat maskant; anodize coating maskant Resists most acids and alkalis; red in color for greater visibility; peels off easily; leaves no residue
724 Grinding maskant; peening maskant; grit blast maskant Low adhesion; manual peel off
726 Grinding maskant; grit blast maskant; acid (HCL) stipping maskant Heat resistant
727-BT Cooling cavity sealant; grinding maskant Blue in color; resistant to chemical processing

WATER SOLUBLE MASKS Wash off with hot water spray or agitated bath (140°F-180°F) UV Curable Masking Resins
713-Gel Grit blast maskant; peening maskant; cooling cavity sealant Easy, automated removal; no heat or manual labor required; for use where parts cannot be exposed to high temperatures
714*
714-C

*Pink fluorescing under black light for inspection

 

  

Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC

 

Environmentally Safe, UV Curable Masking Resins Article as Pubished in Metal Finishing News
Download the article
Environmentally Safe, UV
Curable Masking Resins
as published in the
Vol.5 March 2004 issue
of Metal Finishing News
(2 MB)

Plating UV Curable Maskant
Plating UV Curable Maskant

Acid Strip UV Curable Maskant
Acid Strip UV Curable Maskant

UV Curable Spray Maskant
UV Curable Spray Maskant

Grit Blast Mask
Grit Blast Maskant


Max says if you don't see the adhesive that suits your application, call DYMAX Applications Engineering
for a recommendation. We have a library of over 3,000 adhesive formulations to choose from!

 
DYMAX Corporation 318 Industrial Lane

DYMAX Corporation  |  318 Industrial Lane  |  Torrington, CT 06790  |  ISO 9001:2000 Certified
Phone: (860) 482-1010  |  Fax: (860) 496-0608  |  E-mail: info@dymax.com
©2007 DYMAX Corporation  |  Search Engine Optimization by Service Internet Solutions
69.20.85.128