DYMAX Home
DYMAX Home
Visit our Blog   Follow Us on Twitter   Become a DYMAX Facebook Fan    Connect With Us on LinkedIn    Subscribe to our Light Lines E-Newsletter    Watch Us on YouTube    DYMAX Corporation on Google+   
Dymax Worldwide  English  Español   Deutsch  Français  中文  한국어 
SEARCH
 

Home  Products  Masking  





SpeedMask® Light-Curable Maskants
Replace Tape, Wax, Lacquers, and Fixtures

Request an Adhesive Sample!
Consultation Request
Contact Tech Support

SpeedMask® is a line of DYMAX light curable temporary masking resins that offer reliable surface protection not available from traditional masking materials such as tapes, lacquers, and waxes. SpeedMask light curing masking resins are available in several viscosities, which can be quickly applied by syringe or through dipping, spraying, or screen printing. Residue-free removal is achieved with peelable, water-soluble, or burn-off grades. They cure upon exposure to light energy. Compare SpeedMask masking resins to traditional masking materials...

SpeedMask masking resins are used in surface preparation and finishing operations where a barrier is needed to protect surfaces and cavities.  SpeedMask masking resins are successfully being used in many industries, including aerospace, power generation, metal finishing, and the manufacturing of orthopaedic implants and medical devices. These masking resins offer reliable protection during the following processes:

Acid Stripping
Products: 728-G | 729
Airflow Testing
Products: 724
Grit Blasting
Products: 724 | 726-SC | 728-G | 730-BT | 731 | 733 | 734-BT
Machining
Products: 729 | 733
Plating
Products: 726-SC | 728-G | 730-BT | 731 | 733 | 734-BT
Shot Peening
Products: 724 | 726-SC | 728-G | 730-BT | 731 | 733 | 734-BT

DYMAX SpeedMask masking resins contain no non-reactive solvents and cure in seconds, providing cost savings through reductions in labor, rework and scrap. They are preferred over traditional masking materials such as waxes, tapes, and lacquers due to ease of application, superior protection with consistent reliability, and fast cure time. Refer to the chart below for a comparison.

Compare SpeedMask® Masking Resins to Traditional Masking Materials

SpeedMask®  Masking Resins Traditional Masking Materials
» SpeedMask Advantages Over Tapes

bullet Apply and cure in seconds
bullet Leaves residue-free surfaces
bullet Provides reliable protection for complex
and intricate configurations
bullet Offers consistent protection

» Tapes

  • Labor intensive
  • Leaves residue after removal
  • Inadequate protection for complex configurations and rough surfaces
  • Inconsistent protection

» SpeedMask Advantages Over Waxes

bullet Single coat of SpeedMask Resin provides superior protection
bullet Burn-off, peelable, or water-soluble formulations leave residue-free surface after removal
bullet Apply and Cure in seconds

» Waxes

  • Multiple coats required for adequate surface protection
  • Cooling time needed between coats
  • Soak in hot water to remove wax and residue
  • Wax residue left on surface
  • Hot wax can present worker safety issues
  • Valuable floor space needed for cooling cycles between coats
» SpeedMask Advantages Over Lacquers

bullet Single coat of SpeedMask Resin provides superior protection
bullet Cures in seconds
bullet Burn-off, peelable, or water-soluble formulations leave residue-free surface after removal
bullet Contains no non-reactive solvents
bullet Masked components ready for production immediately

» Lacquers

  • Multiple coats required for adequate protection
  • Cure time can be minutes to hours between coats
  • Soak in methyl ethyl ketone (MEK) or equivalent solvents for removal
  • Solvent-based lacquers present worker and workplace environmental issues
  • Valuable floor space needed during curing time
» SpeedMask Advantages
   Over Masking Boots & Caps

bullet Accommodates complex and intricate component configurations
bullet No additional investment for design changes or new components
bullet Universal maskant; not one-time use
bullet Offers reliable protection

» Masking Boots & Caps

  • Customization of boots and caps - one configuration use only
  • Inadequate sealing of surfaces over time during chemical processing
  • Finite wear life

Masking Resins Max

Max says if you don't see a masking resin that suits your application, call DYMAX Applications Engineering for a recommendation.


Copyright Notices | Terms of Use | Privacy Statement | Site Index | Impressum |

©2013 Dymax Corporation | 318 Industrial Lane | Torrington, CT 06790 | ISO 9001 Certified
Phone: (860) 482-1010 | Fax: (860) 496-0608 | E-mail: info@dymax.com