|
SpeedMask® Temporary UV Curable
Masking Resins: CHEMICAL PROCESSES |
|
SpeedMask®
masking resins are formulated to provide superior surface protection and
chemical resistance during chemical processes. Common chemical processes
where these masking resins are successfully being used include:
If you do not see your process, please contact Tech Support to learn how SpeedMask Masking Resins can make your manufacturing more efficient. DYMAX has hundreds of formulations available or a new one can be created if a truly customized solution is more desirable.
|
| Acid Stripping |
|---|
SpeedMask® light curing masking resins provide reliable surface protection of intricate and complex configurations during the acid-stripping process to remove coatings in the overhaul and repair of turbine components.
SpeedMask masking resins have been formulated to withstand soaking in hot acid without permeation or seepage under the mask. When
properly cured, the resins provide superior surface protection from chemical processing of nickel super alloys, steel, and titanium. |
|
The temporary maskants will hold up to the surface preparation of grit blasting, which may be required, prior to or in combination with the hot acid soak. SpeedMask
masking resins can tolerate most acid soaks such as Hydrochloric (HCl), Nitric (HNO3), Acetic (CH3COOH), Phosphoric (H3PO4), Hydrofluoric (HF), or various combinations of the acids.
- Cures in seconds enabling faster processing, greater output, and lower processing costs
- Residue-free removal
- Applied by spraying, dipping, or coating
|
|
Acid-Stripping Maskants
Products:
728-G |
729
» View a comparison of DYMAX Aerospace, Power Generation, and Metal Finishing SpeedMask
masking resins
|
| Anodizing |
|---|
SpeedMask® light curing masking resins provide superior surface protection during the anodizing of turbine and other metal components,
orthopaedic implants, surgical instruments, and other medical devices.
SpeedMask masking resins have been formulated with more chemical resistance for better surface protection from the strong acids used in the anodizing process. The cured maskant protects the substrate surface while the oxide layer of coating (which is designed to change the microscopic texture of the component surface) is being applied. |
|
SpeedMask masking resins can tolerate most Type I (Chromic Acid), Type II (Sulfuric Acid), or Type III (Hardcoat) anodizing processes.
- Cures in seconds enabling faster processing, greater output, and lower processing costs
- Residue-free removal
- Applied by spraying, dipping, or coating
|
|
Anodizing Maskants
Products:
726-SC |
728-G |
730-BT |
7123-R |
7126 |
7126-SC |
7127-G |
7128-G
» View a comparison of DYMAX Aerospace, Power Generation, and Metal Finishing SpeedMask masking resins
» View a comparison of DYMAX Orthopaedic Implant, Surgical Instrument, and Medical Device Component SpeedMask masking resins
|
| Chemical Milling |
|---|
SpeedMask® masking resins provide superior surface protection during the chemical milling of
turbine and other metal components, orthopaedic implants, surgical
instruments, and other medical devices.
SpeedMask masking resins have been formulated with enhanced chemical resistance for reliable protection from strong acids and alkalis used in dissolving metal substrates during chemical milling.
SpeedMask 727-BT can be trimmed to provide defined edge boundaries and accommodate the most complex and intricate components while still providing excellent protection with no leakage. |
|
A selection of the best SpeedMask masking resins were developed to withstand typical Sodium Hydroxide (NaOH) and Potassium Hydroxide (KOH) solutions used for the chemical milling of aluminum components.
- Cures in seconds enabling faster processing, greater output, and lower processing costs
- Residue-free removal
- Applied by spraying, dipping, or coating
|
|
Chemical-Milling Maskants
Products:
730-BT |
7127-G
» View a comparison of DYMAX Aerospace, Power Generation, and Metal Finishing SpeedMask masking resins
» View a comparison of DYMAX Orthopaedic Implant, Surgical Instrument, and Medical Device Component SpeedMask masking resins
|
| Plating |
|---|
SpeedMask®
light curing masking resins provide superior surface protection of turbine and other metal components,
orthopaedic implants, surgical instruments, and other medical devices during various plating processes.
SpeedMask masking resins have been formulated with chemical
and heat resistance to protect masked areas during plating processes where
particles are deposited onto conductive surfaces. These resins are able to
withstand the most common plating processes such as Electroless Nickel (Ni),
Platinum (Pt), Chrome (Cr), Gold (Au), Silver (Ag), and Copper (Cu). |
|
SpeedMask temporary masking resins are
available in low, moderate, and high levels of adhesion to accommodate the various operating temperatures of plating baths. The higher the temperature of a plating process, the higher the maskant adhesion will need to be. The higher the pH of a plating mask, the greater the need for a chemical-resistant maskant.
- Cures in seconds enabling faster processing, greater output, and lower processing costs
- Residue-free removal
- Applied by spraying, dipping, or coating
|
|
Plating Maskants
Products:
726-SC |
728-G |
730-BT |
7123-R |
7126 |
7126-SC |
7127-G |
7128-G
» View a comparison of DYMAX Aerospace, Power Generation, and Metal Finishing SpeedMask masking resins
» View a comparison of DYMAX Orthopaedic Implant, Surgical Instrument, and Medical Device Component SpeedMask masking resins
|
|
|
