SG-100 Hand-Held Standard and High-Flow Spray Gun Dispensing Systems for Coating and Masking Applications |
|
|
Dymax SG-100 hand-held spray guns, available in both standard and high flow models, provide a solution to manually spray fluids for masking and coating applications. The SG-100-RS standard-flow spray gun is ideal for dispensing fluids with viscosity lower than 10,000 cP, while the SG-100-RH is better suited for spraying fluids with viscosity of 10,000 cP and higher.
Both SG-100 models utilize a normally closed, stainless steel needle valve to control fluid flow and have a dual-acting air cylinder that provides immediate start/stop functionality. A stroke adjustment on the valve can be used to fine tune the flow rate and a precision air regulator/gauge assembly simultaneously activates the atomizing air while the valve is opened and fluid is flowing. Both models are delivered with a round spray cap that provides a circular spray pattern, with an optional flat spray cap available if a linear or flat spray pattern is preferred.
The guns' design incorporates a durable, lightweight, cast metal handle with pneumatic trigger mechanism so no additional electronic controls are required to activate the spray. The operator effortlessly controls the spray by manually pulling or releasing the trigger. |
|
Dymax spray valves provide users with manual
control over the valve and its spray and are ideal
for the following applications:
- Masking of turbines or other metal surfaces
before surface treatment
- Masking medical implants before finishing
treatments
- Conformal coating of circuit boards
- Spraying solvents for cleaning part surfaces
- Coating large parts with grease or other
lubrication before assembly
|
Spray Gun with Round Spray Cap for Manual Spraying |
|
|
| Features | Benefits |
| All wetted components are stainless steel, Teflon®, or Kalrez® | - Compatible with greater number of fluids
|
| Able to dispense from pressurized cartridges, bottles, and pails (requires appropriate reservoir hardware) | - Compatible with most standard fluid packages and delivery systems (Dymax can supply all the necessary parts and components to build a complete spay system.)
|
| Lightweight assembly with low trigger resistance | - Ergonomic design allows for hours of effortless spraying
|
| Easy adjustment of material flow and spray atomization | - Greater dispensing accuracy with less material waste
|
| Pneumatically operated | - No electrical power required
|
| Sealed fluid body with no exposure to ambient conditions | - Easy shutdown and cleanup
|
|
| Specifications |
|---|
| Part Numbers |
T16624: SG-100-RS Standard-flow Spray Gun, Round Spray Cap
(use with viscosities <10,000 cP) |
T16929: SG-100-RH High-flow Spray Gun, Round Spray Cap
(use with viscosities >10,000 cP)
»See
Systems Part Numbers Below |
| Activation |
Manually Controlled - Trigger Actuated |
| Electrical Power Requirements |
None |
| Air Pressure Required |
Valve Operation: 60 psi [4.14 bar] to 100 psi [6.89 bar] |
Atomizing Air: 0 psi [0 bar] to 15 psi [1.03 bar] (Standard-flow Spray Gun)
0 psi [0 bar] to 30 psi [2.06 bar] (High-flow Spray Gun)
|
| Spray Pattern |
Round Air Cap (standard): 0.25" - 1.0" [6.35 mm - 25.40 mm] |
| Flat Air Cap (optional): 0.50" - 2.0" [12.70 mm - 50.80 mm] |
| Flow Rate |
Standard flow: 0.3 mL/sec (spraying 25,000 cP thixotropic fluid) |
| High flow: 2.0 mL/sec (spraying 25,000 cP thixotropic fluid) |
| Fluid Input Fitting |
3/8 tube push in Accepts 3/8" OD tubing |
| Dimensions (L x W x H) |
Spray Gun Assembly: 8" x 4" x 8" (20.5 cm x 10.2 cm x 20.5 cm) |
| Air Regulator Stand: 8" x 9" x 9" (20.5 cm x 22.8 cm x 22.8 cm) |
| Weight |
Spray Gun Assembly: 1.7 lb (0.8 kg) |
| Air Regulator Stand: 6.6 lb (3.0 kg) |
| Unit Warranty |
1 year from purchase (excludes soft seals) |
| Options and Accessories |
T15697
Flat Spray Air Cap
|
T15454
Spray Gun Stand with
Solvent Cup |
T16307
Air Filter Regulator with
Air Shut Off |
T16629
High-Precision Air
Regulator for fluid pressure |
T16787
Fluid Line Kit -
3/8" OD, Polyethylene |
T16793
Fluid Line Kit -
1/4" OD, Polyethylene |
|
|
|
Select System Based on Fluid Package Used
| |
Cartridge Drop-In |
Large Bottle Drop-In |
Pail Drop-In |
6 oz
[160 mL] |
12 oz
[300 mL] |
20 oz
[550 mL] |
Up to 1 Gallon |
Up to 15 Liter
Straight or Tapered |
 |  |  |
 |
 |
| SG-100-RS Standard-Flow Spray System (use with materials <10,000 cP) |
T21025
RFQ |
T21035
RFQ |
T21045
RFQ |
T21070
RFQ |
T21080
RFQ |
| SG-100-RH High-Flow Spray System (use with materials >10,000 cP) |
T21125
RFQ |
T21135
RFQ |
T21145
RFQ |
T21170
RFQ |
T21180
RFQ |
|
|
Max says for assistance with your dispensing needs, contact DYMAX. |
