ACCU-CAL™ 50-LED Radiometer
CE Marked Available Globally
|
|
Consistent light curing requires periodic monitoring of the light energy intensity and dosage levels. The ACCU-CAL™ 50-LED radiometer is simple to operate and offers accurate measurement of curing energy. The ACCU-CAL™ 50-LED can measure energy levels emitted from lightguides (3 mm, 5 mm, and 8 mm) and LED flood lamps. A spectral sensitivity range of 350 - 450 nm and intensity measurement from
1 mW/cm2 to 40 W/cm2, makes this unit ideal for measuring LED curing source energy levels. A specially designed photo-sensor assembly provides repeatable measurements and protection from high temperature associated with some LED systems on the market.
- Simple to operate
- Set screw locks lightguide in place
- PTB and NIST traceable
 PN 40519
ACCU-CAL™ 50-LED for measuring LED flood lamps and conveyors. |
 PN 40505
ACCU-CAL™ 50-LED for measuring LED spot and flood lamps. |
|
| ACCU-CAL™ 50-LED Radiometer Specifications |
|---|
| Spectral Sensitivity | 350 to 450 nm |
| Intensity Range | 1 mW/cm2 to 40 W/cm2 |
| Resolution | Intensity (1 mW/cm2; to three significant digits)
Dose (1 mJ/cm2) |
| Calibration Period | 12 months |
| Operating Temperature Ranges | Optometer: +5 to +40°C
Detector: 120°C continuous, Peak 200°C |
| Measurement Modes | Intensity (mW/cm2)
Peak Intensity (mW/cm2)
Dose (mJ/cm2) |
| Light Sources | Lightguides (3 mm, 5 mm, and 8 mm), LED Flood Lamps |
| Power Supply | Two (2) AA batteries |
| Battery Life | 250 hours (automatic shutoff after 1 hour) |
| Sensor Dimensions | Photo-Sensor Diameter = 9 mm
Diameter = 37 mm
Thickness = 8 mm
Cable Length = 1 M |
| Meter Dimensions | 145 mm (Length) x 63 mm (Width) x 30 mm (Thickness) |
|
| RADIOMETERS and ACCESSORIES |
|---|
| Product | Part # | Description |
| ACCU-CAL™ 50-LED for LED Spot and Flood Units | 40505 | Complete radiometer with lightguide adapters (3 mm, 5 mm, and 8 mm) and lightguide simulator*; includes storage/carrying case |
| ACCU-CAL™ 50-LED for LED Flood Units | 40519 | Complete radiometer for LED flood and conveyor systems; includes storage/carrying case |
| Flood to Spot Adapter Kit | 39554 | Kit includes three lightguide adapters (3 mm, 5 mm, and 8 mm) and a lightguide simulator* |
| 3 mm Lightguide Adapter | 39556 | Fits 3 mm ID lightguides (5 mm OD) |
| 5 mm Lightguide Adapter | 39557 | Fits 5 mm ID lightguides (7 mm OD) |
| 8 mm Lightguide Adapter | 39558 | Fits 8 mm ID lightguides |
| Lightguide Simulator* | 38408 | Lightguide simulator* (Fits all standard lightguide entrance fittings) |
*A lightguide simulator is used to measure direct spot lamp intensity (required to calculate lightguide transmissions) |
|
If you're not sure which curing system is the right one for you, Max says to Click here to evaluate UV technology for two weeks FREE! with a DYMAX lamp through our Equipment Trial Rental/Lease Program.
|
