ACCU-CAL™ 150 Radiometer - UV Intensity Meter for use with UV Light-Curing Flood Lamps and Conveyor Systems
CE Marked Available Globally |
|
Consistent UV curing requires periodic monitoring of UV intensity or dose. The
ACCU-CAL™ 150 radiometer is simple to operate and offers repeatable measurement of UV light. The ACCU-CAL 150 can measure UV light up to 10 W/cm2 emitted from stationary flood curing lamps or lamps used in conveyorized processes. This radiometer can be used to determine intensity (measured in mW/cm2) or total energy as derived from intensity and exposure time (measured in mJ/cm2). The ACCU-CAL 150 radiometer greatly simplifies both validating and monitoring a UV curing process.
Two Reasons to Use a UV Radiometer
- Validating and Maintaining a Light-Curing Process - A radiometer provides a quantifiable measurement that verifies if the UV curing process is operating within the qualified parameters. Since all UV bulbs degrade over time, the radiometer will reveal the optimal time for bulb replacement in the UV curing device. Radiometers provide the same monitoring control for light-curing processes that thermometers provide for thermal processes.
- Measuring Transmission Rates Through Substrates - A radiometer can be used to measure the light transmission rates of various wavelengths through substrates that absorb UV and/or visible light. To assure an effective curing process it is critical to measure the light intensity reaching the resin below the intervening substrate.
|
| ACCU-CAL™ 150 Radiometer Specifications |
|---|
| Spectral Sensitivity | 320 to 390 nm |
| Intensity Range | 10 mW/cm2 to 10 W/cm2 |
| Accuracy | ± 10%, ± 5% typical |
| Resolution | Intensity (1 mW/cm2)
Dose (1 mJ/cm2) |
| Calibration Period | 6 months |
| Operating Temperature Ranges |
0-75°C Internal temperature; tolerates high external temperatures for short periods (audible alarm indicates when temperature has exceeded tolerance) |
| Measurements | Peak Intensity (mW/cm2)
Dose (mJ/cm2) |
| Light Sources | UV curing flood lamps and conveyor systems |
| Power Supply | Two (2) AAA batteries |
| Battery Life | 20 hours with display on (automatic shutoff after 2 minutes) |
| Instrument Dimensions | 4.60 x 0.50 inches; 117 mm x 12.7 mm (D x H) |
| Instrument Weight | 10.1 ounces (289 grams) |
| Instrument Materials | Aluminum, stainless steel |
| Carrying Case Dimensions |
10.75 x 3.5 x 7.75 inches; 274 x 89 x 197 mm (W x H x D) |
| Carrying Case Weight | 9 ounces (260 grams) |
| Carrying Case Materials |
Cut polyurethane interior, scuff resistant nylon exterior cover |
| Part Number | 40550 |
| Optional Data Download Kit |
40629 Allows data capture and download to PC |
|
|
If you're not sure which curing system is the right one for you, Max says to Click here to evaluate UV technology for two weeks FREE! with a DYMAX lamp through our Equipment Trial Rental/Lease Program.
|
Simple to Operate 