UV Light Adhesive Curing Equipment Systems - Liquid Lightguides for Use with UV Spot Curing Equipment Systems

UV Light Adhesive Curing Equipment Systems - Liquid Lightguides for Use with UV Spot Curing Equipment Systems

DY says Click here to see more Lightguides

SINGLE-POLE and MULTI-POLE LIGHTGUIDES
for UV Spot Light Curing Systems

DYMAX BlueWave® 200 and ADAC Systems Cure Spot™ lights use flexible liquid lightguides for rapid and controlled curing of DYMAX UV adhesives, coatings and sealants. A liquid lightguide is an optical instrument comprised of a light conducting liquid core within plastic tubing. The liquid is non-toxic, non-flammable and transparent from 270 to 720 nm. The ends of a lightguide are sealed with high quality quartz glass and metal spiral tubing surrounded by a plastic sleeve for exterior protection.

Guide to Selecting and Using DYMAX UV Light Curing Systems
REGISTER to download the PDF version of our Lit.010A Guide to Selecting and Using DYMAX UV Light Curing Systems (915 KB)

  • Liquid lightguides are protected against degradation with the DYMAX Cool Blue™ Filter
  • Liquid lightguides transmit 20-30% more UVA light than more costly quartz lightguides
  • Liquid lightguides stand up to cleaning and flexing better than quartz fiber
  • Light spectrum output is more favorable to photoinitiators in the UVA, violet and blue ranges (300-460 nm)
  • Standard DYMAX multi-pole lightguides incorporate integrating rods for a more balanced output from pole to pole

 

 


 

Diagram Description Part Number
Single Pole Liquid Lightguide for use with UV Spot Light Curing Systems Single Pole Liquid Lightguide:
The 5 mm x 1000 mm single aperture liquid lightguide has a light output of approximately 90% of a lightguide simulator
1 x 5 mm x 1 M
P/N 5720

1 x 5 mm x 1 M extended range/UVB
P/N 5702
Single Pole Liquid Lightguide for use with UV Spot Light Curing Systems Single Pole Liquid Lightguide 1 x 5 mm x 1.5 M
P/N 5721

1 x 5 mm x 1.5 M extended range/UVB
P/N 38674
Single Pole Liquid Lightguide for use with UV Spot Light Curing Systems Single Pole Liquid Lightguide 1 x 8 mm x 1 M
P/N 5722

1 x 8 mm x 1.5 M extended range/UVB
P/N 38673
Bifurcated Liquid Lightguide for use with UV Spot Light Curing Systems Bifurcated Liquid Lightguide:
The 3 mm x 1000 mm wand of a bifurcated lightguide has an output of approximately 50% of the light of a lightguide simulator from each individual pole
2 x 3 mm x 1 M
P/N 38476

2 x 3 mm x 1 M Extended Range/UVB*
P/N 5703
Trifurcated Liquid Lightguide for use with UV Spot Light Curing Systems Trifurcated Liquid Lightguide:
The 3 mm x 1000 mm wand of a trifurcated lightguide has an output of approximately 45% of the light of a lightguide simulator from each individual pole
3 x 3 mm x 1 M
P/N 38477

3 x 3 mm x 1 M Extended Range/UVB*
P/N 38675
Four Pole Liquid Lightguide for use with UV Spot Light Curing Systems Four Pole Liquid Lightguide:
The 3 mm x 1000 mm wand of a 4 pole lightguide has an output of approximately 37% of the light of a lightguide simulator from each individual pole
4 x 3 mm x 1 M
P/N 38478

4 x 3 mm x 1 M Extended Range/UVB*
P/N 38676
*Note:  To obtain the benefits of extended range/UVB lightguides, filters must be removed



Custom and quartz lightguides are available upon request

UV Light Adhesive Curing Equipment Systems - Liquid Lightguides for Use with UV Spot Curing Equipment Systems


Max says to CLICK HERE to find out how filter mount assemblies for DYMAX UV spot light curing systems tailor spectral output to match your curing requirements.

UV Light Adhesive Curing Equipment Systems - Liquid Lightguides for Use with UV Spot Curing Equipment Systems

DYMAX Corporation  |  318 Industrial Lane  |  Torrington, CT 06790  |  ISO 9001:2000 Certified
Phone: (860) 482-1010  |  Fax: (860) 496-0608  |  E-mail: info@dymax.com
©2007 DYMAX Corporation  |  Search Engine Optimization by Service Internet Solutions
69.20.85.128