12" Wide UV Curing Conveyors with Fusion F-300s
Available Globally (Except in Europe)
DYMAX 12" wide UV curing conveyors offer consistent, fast, and safe UV curing. These conveyors are designed for UV curing adhesives, coatings, and inks and can be outfitted with either standard metal halide (longwave "D") or mercury (shortwave "H") bulbs. Consistent line speed, consistent lamp height, and consistent UV output provide a consistent UV cure. These UV conveyors do not emit stray UV light despite utilizing some of the most intense UV curing systems on the market. These conveyors can be outfitted with one or two high intensity Fusion F300s as shown in the configurations shown below.
|
|
 |
Download our UV Curing Conveyors with Fusion F300s Product Bulletin (354 KB) |
|
REGISTER
to download the UVCS Fusion UV Light Curing Conveyor Systems Operations Manual (1125 kb) |
|
REGISTER
to download Lit.010A Guide to Selecting and Using DYMAX UV Light Curing Systems (915 KB) |
12" UVCS UV Curing Conveyor
with Two Fusion F-300s and
Optional Transportation Cart |
- Consistent UV curing
- Complete UV shielding
- Adjustable lamp to belt distance
- 4", 6" or 10" vertical clearance
- Integral cooling and vacuum hold-down
- 1 to 27 fpm or 25 to 115 fpm
- 5,000 hour bulb life
- <2,500 mW/cm2
- Benchtop conveyor (cart optional)
|
UV Conveyor System Specifications
| Maximum UVA Intensity (320-395nm)* |
2,500 mW/cm2* |
| Maximum UVA Energy (320-395nm) @ 5fpm |
2.0 J/cm2 |
| Line Speed |
1-27 fpm or 25-115 fpm |
| Width of Illuminated Area |
6" (one Fusion F300) or 12" (two Fusion F300s) |
| Voltage |
220/230V (50 or 60Hz) |
| Vertical Clearance |
4" (Standard)
6" (with 2" riser kit, 39218)
10" (with 6" riser kit, 39280) |
| Overall Dimensions |
51" L x 39.5" W x 35" H (130cm x 100cm x 89cm) |
| Conveyor Part Numbers |
12" UV Conveyor with one Fusion F300 (6" wide curing)
39150 (1-27 fpm), 39275 (25-115 fpm)
12" UV Conveyor with two Fusion F300s (12" wide curing)
39275 (1-27 fpm), 39276 (25-115 fpm) |
| Bulb Life |
5,000 hours with essentially no degradation |
| Replacement Bulbs |
36399 Standard "D" bulb, Metal Halide
36441 Optional "H" bulb Mercury** |
* As measured with a DYMAX ACCU-CAL™ 50 radiometer
** These bulbs are primarily designed for curing UV inks and cationic epoxies |
One Fusion F300
(for 6" wide curing)
Two Fusion F300s
(for 12" wide curing) |
|