Edge-Carry UV Curing Conveyor
Not Available in Europe |
|
|
The Dymax Edge-Carry series of conveyors is designed for efficient curing of UV and/or visible light-sensitive adhesives, inks, and coatings. These conveyors can be outfitted with a variety of lamp configurations to address a variety of application specific requirements. They offer complete shielding from UV light and consistent cure times. Configuration options allow flexibility when defining intensity requirements to keep operating costs to a minimum. Standard height clearance is 0.75" across the entire 18" width, which is ideal for low profile parts such as PCBs, and up to 6 inches across a 13.75" width, which can be increased to either 8" or 12" with optional risers installed.
Features
|
|
Choosing the Right Lamp(s) for Your Edge-Carry Conveyor
Edge-Carry series conveyors can be outfitted with Dymax 5000-EC, 2000-EC, and 1200-EC lamps, or Fusion F300 lamps.
Edge-Carry lamps are sold separately.
5000-EC Lamps
These lamps provide moderate intensity (~200 mW/cm2) over a 6" x 6" (approximate) curing area. Their 400-Watt auto-switching power supplies accept 90 to 264 Volts AC and 47 to 63 Hz. With normal use, 5000-EC bulbs will retain 90% of their original intensity after 1,000 hours. 5000-EC lamps are recommended for small-to-medium throughput bonding applications. For faster or more tack-free cures, Fusion F300 lamps are recommended. |
Dymax Edge-Carry series conveyors can be outfitted with one, two, or four 5000-EC lamps as shown below. |
One 5000-EC lamp center mounted
6" wide single exposure | 
Two 5000-EC lamps center mounted
6" wide double exposure | 
Two 5000-EC lamps full-width mounted 12" wide single exposure | 
Four 5000-EC lamps full-width mounted 12" wide double exposure |
|
| UVCS 5000, 1200/2000 EC, and Fusion F300 Lamp Specifications and Features |
|---|
| | 5000-EC Lamps | 2000/1200
EC Lamps | Fusion
F300
Lamps |
|---|
| Part Number |
40324 |
40328 |
40325 |
40329 |
40326 |
40275 |
40327 |
40331 |
40334
40335 |
40332
40333 |
40336 |
40280 |
| Maximum Chain Spacing |
18" |
18" |
| Number of Lamps |
1* |
2* |
2 |
4 |
1* |
1* |
1* |
2 |
Lamp Orientation
CM = center mounted
FW = full width |
CM |
FW |
CM |
CM |
CM |
FW |
| Width of Illuminated Area |
6" |
12" |
9" |
9" |
6" |
12" |
Maximum UVA Intensity
(320-390 nm) |
200 mW/cm2 |
100 mW/cm2 |
400 mW/cm2 |
2,500 mW/cm2 |
Maxiumu UVA Energy
(320-390 nm) @ 5 fpm (J/cm2) |
1.25 |
2.50 |
1.25 |
2.50 |
0.1 |
0.4 |
2 |
Shipping Weight
with Crates (lbs.) |
390 |
410 |
450 |
390 |
390 |
475 |
580 |
Belt Speeds
(feet per minute) |
1-32 fpm |
1-32 fpm |
1-32 fpm |
| Voltage (VAC) |
115V |
208-240V |
115V |
208-240V |
115V |
208-240V |
115V |
208-240V |
115 or 208-240V |
208-240V |
| Amperage |
9.6 |
4.8 |
17.6 |
8.8 |
17.6 |
8.8 |
33.6 |
16.8 |
| |
16 |
32.6 |
*These conveyors have center-mounted lamps that are supplied with removable guides to channel parts into middle 6" of conveyor.
**These bulbs are primarily designed for curing UV inks and cationic epoxies.
|
|
Max says evaluate UV technology for two weeks FREE! with a Dymax lamp through our Equipment Trial Rental/Lease Program.
|
