| Product |
Application |
Characteristics & Features |
| Conformal Coatings |
|---|
| 9481-E |
Conformal coating of circuit boards |
MIL/IPC/UL recognized; highest chemical resistance; designed for manual spraying processes or applications with unavoidable shadows; compatible with all spray equipment; secondary moisture cure |
|
| 984-LVUF |
Conformal coating of circuit boards |
MIL/IPC/UL recognized; high chemical resistance; compatible with all spray equipment; secondary heat cure; blue fluorescing available |
|
| 987 |
Conformal coating of circuit boards |
MIL/IPC recognized; high chemical resistance; lower surface energy for enhanced wetting; compatible with all spray equipment; secondary heat cure; fluorescing available |
|
| 9-20557 |
Conformal coating of circuit boards |
MIL/IPC/UL recognized; flexible for thermal cycling |
| Dome Coatings |
|---|
| 4-20508 |
Dome coating logos & emblems; decorative coating |
Scratch-resistant dome coating; moderate-dome profile; indoor exposure only |
|
| 4-20564 |
Dome coating logos & emblems; decorative coating |
Scratch-resistant dome coating; high-dome profile; indoor exposure only |
|
| 4-20577 |
Dome coating logos & emblems; decorative coating |
Soft, flexible dome coating; limited outdoor exposure |
|
| 4-20638 |
Dome coating logos & emblems; decorative coating |
High gloss, scratch resistant dome coating; limited outdoor exposure |
| Encapsulants & Potting Materials |
|---|
| 921-T |
Potting and ruggedizing assemblies; protection from environments |
Potting phenolic and filled plastics; excellent adhesion to glass and metals |
|
| 9001-E-v3.1 |
Potting and ruggedizing assemblies; protection from environments |
Flexible, resilient encapsulant/potting material; excellent thermal cycling; excellent adhesion to Kapton |
| Gaskets |
|---|
| GA-105 |
Form-In-Place gasket |
Low durometer, flexible, sticky resin; excellent adhesion to variety of plastics, metals, glass, and ceramics |
|
| GA-108 |
Form-In-Place gasket |
Good adhesion to glass-filled nylon, metals, glass, and ceramics; flexible and soft |
|
| GA-112 |
Form-In-Place gasket |
Tack-free, moisture-resistant gasket; low outgassing |
|
| GA-140 |
Form-In-Place gasket |
Tack-free gasket with low outgassing; excellent tear resistance |
|
| GA-142 |
Form-In-Place gasket |
Soft, flexible gasket; low compression set |
| Industrial Adhesives (Glass, Metal, Plastic Bonders) |
|---|
| 3025 |
LED potting, encapsulation, and alignment |
Plastic and metal bonder for dissimilar substrates |
|
| 3069 |
LED potting, encapsulation, and alignment |
Excellent PVC and PC bonder; flexible lamination and bonding |
|
| 3099 |
LED potting, encapsulation, and alignment |
Excellent glass, polycarbonate, PMMA bonder |
|
| 3225-T-SC |
LED potting, encapsulation, and alignment |
Plastic to metal bonder for dissimilar substrates; See-Cure adhesive changes from blue to clear upon exposure to UV/Visible light |
|
| 6-621 |
Magnet-to-housing bonding; DC motor magnet-to-can bonding; bearing mount assembly; flange bonding; magnet-to-flywheel bonding; commutator-to-shaft sealing; tab sealing; amature wire unitizing; chokes, ferrite cores, and transformer bonding |
Excellent adhesion to metals, glass, and many plastics; Multi-Cure® with secondary heat cure for shadowed areas |
|
846-GEL w/
501-E Activator |
Magnet-to-housing bonding; DC motor magnet-to-can bonding; bearing mount assembly; flange bonding; magnet-to-flywheel bonding; commutator-to-shaft sealing; tab sealing; amature wire unitizing; chokes, ferrite cores, and transformer bonding |
Activator-cured structural adhesive; wipe on, solvent-less primer |
| Ruggedizing |
|---|
| 9422-SC |
Ruggedizing circuit boards by tacking wires |
See-Cure adhesive for component edgebond/ruggedization/reinforcement; highly thixotropic for minimal movement after dispense |
|
| 9-911-REV-A |
Ruggedizing circuit boards by tacking wires |
High viscosity Multi-Cure® adhesive; excellent adhesion to metals and ceramics |
