| Product |
Application |
Characteristics & Features |
| Conformal Coatings |
|---|
| 984-LVUF |
Conformal coating of circuit boards |
MIL/IPC/UL recognized; high chemical resistance; compatible with all spray equipment; secondary heat cure; blue fluorescing available |
| Cyanoacrylates |
|---|
| MR-290 |
Bonding grips, components, battery, housing |
Cyanoacrylate for plastic bonding; resists moisture and humidity; temperature resistant |
| Encapsulants & Potting Materials |
|---|
| 9001-E-v3.1 |
Potting of isolated chips and circuits |
Flexible, resilient encapsulant/potting material; excellent thermal cycling; excellent adhesion to Kapton |
| Gaskets |
|---|
| GA-103 |
FIP gaskets for vibration isolation and reduction |
Chemical resistant, tack-free gasket; Newtonian formulation; low glass-transition temperature; thermal range -85° to 200 °C
(-120° to 390°F) |
|
| GA-112 |
FIP gaskets for vibration isolation and reduction |
Tack-free, moisture-resistant gasket; low outgassing |
|
| GA-120 |
FIP gaskets for vibration isolation and reduction |
Soft, tacky gasket with good adhesion to nylon and metals; greatest deflection; ideal for sound dampening |
|
| GA-142 |
FIP gaskets for vibration isolation and reduction |
Soft, flexible gasket; low compression set |
| Industrial Adhesives (Glass, Metal, Plastic Bonders) |
|---|
| 3025 |
LED bonding and fixturing; bonding and alignment of lasers or levels into the housing; bonding outer window into housing |
Plastic and metal bonder for dissimilar substrates |
|
| 3069 |
LED bonding and fixturing; bonding and alignment of lasers or levels into the housing; bonding outer window into housing |
Excellent PVC and PC bonder; flexible lamination and bonding |
|
| 3099 |
LED bonding and fixturing; bonding and alignment of lasers or levels into the housing; bonding outer window into housing |
Excellent glass, polycarbonate, PMMA bonder |
|
| 3225-T-SC |
LED bonding and fixturing; bonding and alignment of lasers or levels into the housing; bonding outer window into housing |
Plastic to metal bonder for dissimilar substrates; blue to clear upon exposure to UV/Visible light |
|
| 429 |
Bonding outer window into housing |
UV glass, plastic, and metal bonder; resistant to UV, yellowing, thermal shock, and high impact |
|
| 6-621 |
Bonding windings on commutator |
Excellent adhesion to metals, glass, and many plastics; Multi-Cure® with secondary heat cure for shadowed areas |
|
| 6-625-SV01-REV-A |
Bonding windings on commutator |
Excellent adhesion to metals, glass, and many plastics; more flexible than 6-621 |
|
846-GEL w/
501-E Activator |
Bonding magnets |
Activator-cured structural adhesive; wipe on, solvent-less primer |
| Ruggedizing |
|---|
| 9-911-REV-A |
Wire tacking |
High viscosity Multi-Cure® adhesive; excellent adhesion to metals and ceramics |
