734-BT: Ultra Light-Weld®
Chemical Milling & Harsh-Environment Processing Maskant
UV/Visible light curable masking resin is formulated to provide good surface protection during chemical milling/etching, plating, anodizing, and aggressive grit-blasting operations aiding in the manufacturing, overhaul, repair, and rework of turbine engine blades, vanes, and other turbine components. 734-BT is impervious to most acid and alkali solutions.
When cured, it provides surface protection from chemical processing of nickel alloys, steel, titanium, stainless steel, aluminum, and glass.
SpeedMask 734-BT is a fast-curing, solvent-free organic resin designed for either spray or dip masking of components. Used as a temporary protective coating, SpeedMask 734-BT is a replacement for environmentally hazardous and time-consuming solvent- or water-based maskants.
734-BT requires no mixing prior to use.
|Viscosity||Shore Hardness||Modulus of Elasticity|
|Cure Time*||Package Sizes Available*|
|24,000 cP nominal||D25||5.5 ||5 Seconds||30 mL Syringe|
160 mL Cartridge
300 mL Cartridge
1 WM Liter Bottle
15 Liter Tapered Pail
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
*In Europe materials are sold in g/kg not mL/L
- UV/Visible Light Curing
- Excellent Surface Protection
- Excellent Chemical Resistance
- Fast Curing
- Easy Peel Off
- Moderate Adhesion
- Spray or Dip
- High-Visibility Blue Color
- Trimmable After Cure
- Chemical Milling/Etching
- Grit Blasting
- Recommended surfaces include nickel alloys, steel, titanium, stainless steel, aluminum, and glass
SpeedMask masking resins are available in syringes, cartridges, and pails.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV/Visible light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!