 |
728-G: Ultra Light-Weld®
New-Generation Plating &
Aggressive Processing Maskant |
|
|
SpeedMask® 728-G UV/Visible light curable masking resin is formulated to provide good surface protection during plating, anodizing, aggressive grit-blasting, shot-peening, and machining operations.
728-G aids in the manufacturing, overhaul, repair, and rework of turbine engine blades, vanes, and other turbine components.
This next-generation formulation is a 100% organic resin, which cures quickly and is easily removed. SpeedMask 728-G protects component substrates such as nickel alloys, steel, titanium, stainless steel, aluminum, and glass. When properly cured, 728-G leaves no residue on the surface. A hot-water soak may be used to ease removal.
| Viscosity | Shore Hardness | Modulus of Elasticity MPa [psi] | Cure Time* |
| 25,000 cP nominal | D55 | 83 [12,000] | 10 seconds |
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
| Features |
- UV/Visible light cure
- Excellent surface protection
- Fast curing
- Easy peel-off after hot-water soak
- Thixotropic gel
- High adhesion
- Sprayable
- High-visibility green color
|
|
| Applications |
- Plating
- Anodizing
- Aggressive grit blasting
- Shot peening
- Machining
|
|
|
|
SpeedMask masking resins are available in syringes, cartridges, and pails.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
|
|

Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!
|