 |
718: Light Weld®
Temporary Masking Resin for Turbine Engine Component Processing |
|
|
SpeedMask® 718 UV/Visible light-curable
thermal spray coating masking resin is formulated to provide excellent surface and cavity protection during APS and HVOF coatings aiding in the manufacturing, overhaul, repair, and rework of turbine engine blades and vanes and other turbine components. This masking resin cures quickly and is easily removed by incineration at a minimum of 650°C [1200°F]. Recommended surfaces include nickel alloys and high-temperature steel.
| Viscosity | Shore Hardness |
Modulus of Elasticity
MPa [psi] | Cure Time* |
Package Sizes Available* |
|---|
| 50,000 cP nominal | D80 |
1,056 [153,278] | 20 seconds | 30 mL Syringe
300 mL Cartridge
1 WM Liter Bottle
|
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
*In Europe materials are sold in g/kg not mL/L
| Features |
|---|
- UV/Visible light curing
- Resists flame-spray processes
- High adhesion
- Hard/durable
- Thixotropic gel
- High viscosity
- Fast curing
|
|
| Applications |
|---|
- Air plasma spray
- HVOF
- Wire arc spray
- D-Gun coating
- Recommended surfaces include nickel alloys & high-temperature steel
|
|
|
|
SpeedMask masking resins are available in syringes, cartridges, and pails.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV/Visible light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!
|
