 |
7127-G: Ultra Light-Weld® Chemical Milling and Harsh Environment Processing
Green Maskant |
|
|
| SpeedMask® 7127-G
UV/Visible light curable masking resin is formulated to provide excellent surface protection during most anodizing, chemical milling, plating, and aggressive grit-blasting operations. 7127-G can be used as an aid in the manufacturing of orthopaedic implants and implant hardware, surgical instruments, and medical devices. This temporary UV/Visible light curable maskant is impervious to most acid and alkali solutions. This 100% organic resin cures quickly and is easily removed after processing. A hot-water soak may be used to ease removal. When properly cured, 7127-G leaves no residue on the surface. After curing, 7127-G can be trimmed to provide defined edge boundaries and accomodate the most complex and intricate components while still providing excellent protection with no leakage.
SpeedMask 7127-G protects component substrates such as titanium, cobalt, nickel alloys, steel, stainless steel, and aluminum.
| Viscosity | Shore Hardness | Modulus of Elasticity
MPa [psi] | Cure Time* |
|---|
| - | - | - | - |
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
| Features |
|---|
- UV/Visible light Curing
- ISO 10993 - Cytotoxicity Approved
- Excellent surface protection
- Excellent chemical resistance
- Fast curing
- High adhesion
- Spray or dip
- Trimmable with no leakage
|
|
| Applications |
|---|
- Anodizing
- Chemical etching/milling
- Plating
- Grit blasting
|
|
|
|
SpeedMask masking resins are available in syringes, cartridges, and pails.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!
|
