 |
7126: Ultra Light-Weld®
Surface Treatment & Protection
Moderate-Adhesion Maskant |
|
|
SpeedMask® 7126 UV/Visible light curable masking resin is formulated to provide excellent surface protection during many plating, anodizing, and powder-coating processes. 7126 aids in the manufacturing of orthopaedic implants and implant hardware, surgical instruments, and medical devices. SpeedMask 7126 also has the ability to remain flexible at higher temperature processes up to 200°C [400°F].
SpeedMask 7126 protects component substrates such as titanium, cobalt, nickel alloys, stainless steel, steel, and aluminum. This resin cures quickly and is easily removed after processing. A hot-water soak may be used to ease removal. When properly cured, 7126 leaves no residue on the surface.
| Viscosity | Shore Hardness | Modulus of Elasticity
MPa [psi] | Cure Time* |
|---|
| 45,000 cP nominal | D40 | 2.6 [380] | 15 seconds |
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
| Features |
|---|
- UV/Visible light curing
- ISO 10993 - Cytotoxicity Approved
- Excellent surface protection
- Good chemical resistance
- Fast curing
- Moderate adhesion, easy peel-off
- Thixotropic gel
- Spray or dip
|
|
| Applications |
|---|
- Plating
- Anodizing
- Part handling
|
|
|
|
SpeedMask masking resins are available in syringes, cartridges, and pails.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!
|
