 |
See-Cure 7126-SC: Surface Treatment & Protection, Moderate-Adhesion Maskant |
|
|
SpeedMask® 7126-SC is formulated to provide excellent surface protection of orthopaedic implants, re-usable surgical instruments and medical devices during plating, air plasma spray, grit-blasting, decorative etching/anodizing, and powder coating processes. The blue transitions to pink upon exposure to sufficient light energy indicating full cure has been achieved.
SpeedMask 7126-SC also has the ability to remain flexible at higher temperature processes up to 204°C [400°F]. This resin cures quickly and is easily removed after processing. A hot soak may be used to ease removal. When properly cured, 7126-SC leaves no residue on the surface.
| Viscosity | Shore Hardness | Modulus of Elasticity
MPa [psi] | Cure Time* |
|---|
| 50,000 cP nominal | D40 | 3.9 [560] | 15 seconds |
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
| Features |
|---|
- Blue to pink upon sufficient exposure to UV/Visible light
- ISO 10993 - Cytotoxicity Approved
- Excellent surface protection
- Good chemical resistance
- Fast curing, easy peel-off
- Moderate adhesion
- Spray or dip
|
|
| Applications |
|---|
- Plating
- Air plasma spray
- Grit blasting
- Part handling
- Decorative etching & anodizing
|
|
|
|
SpeedMask masking resins are available in drums and pails.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!
|
