 |
7113-Gel: Light Weld®
Water-Soluble Temporary Maskant |
|
|
SpeedMask® 7113-Gel UV light curable masking resin is formulated to provide good surface protection during many shot-peening, grit-blasting, and dry-polishing processes. 7113-Gel aids in the manufacturing of orthopaedic implants and implant hardware, surgical instruments, and medical devices.
SpeedMask 7113-Gel protects component substrates such as titanium, cobalt, steel, stainless steel, and aluminum. This 100% organic resin cures quickly and is easily removed with hot, agitated water. When properly dissolved, 7113-Gel leaves no residue on the surface. A minimum hot-water bath temperature of 60°C [150°F] should be used to dissolve.
| Viscosity | Shore Hardness | Modulus of Elasticity
MPa [psi] | Cure Time* |
|---|
| 60,000 cP nominal | D70 | N/A | 5 seconds |
*Cure time based upon
DYMAX 5000-EC Light Curing Flood Lamp System (200 mW/cm2)
| Features |
|---|
- UV/Visible light curing
- ISO 10993 - Cytotoxicity Pending
- Good surface protection
- Fast curing
- Dissolves in hot water
- Thixotropic gel
- Moderate adhesion
|
|
| Applications |
|---|
- Grit blasting
- Shot peening
- Dry polishing
|
|
|
|
SpeedMask masking resins are available in syringes and cartridges.
DYMAX materials are solvent free and cure upon exposure to light. Their ability to cure in seconds results in lower assembly costs. When cured with DYMAX UV light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the
RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesive formulations to choose from!
|
