 |
6-625-SV01-Rev-A: Multi-Cure®
Adhesive for Plastic, Metal, and Glass |
|
|
Multi-Cure® 6-625-SV01-Rev-A adhesive is a flexible and resilient UV/Visible curing adhesive. These characteristics allow the bonds to withstand strains caused by different coefficients of expansion present when bonding dissimilar substrates.
Multi-Cure 6-625-SV01-Rev-A adhesive was designed for a variety of applications including bonding automotive metal latches to windows and bonding CR-39 plastic lenses to eyeglass frames.
Multi-Cure 6-625-SV01-Rev-A adhesive has good adhesion to many metals, glass, ceramic, and thermoset plastics.
Multi-Cure products can be cured with UV/Visible light, heat, or pre-applied activator.
Viscosity
(nominal) | Tensile at Break | Substrates | Packages Sizes Available |
|---|
| 10,000 cP | 3,400 psi
(23 MPa) | Glass
Metals
Ceramic
Thermoset plastics | 10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
250 mL Bottle
One Liter Bottle
15 Liter Pail
|
| Features |
|---|
- UV/Visible light curing
- Secondary heat cure
- Activator cure
- Flexible
- Clear bonds
- Bonds withstand strains caused by different coefficients of expansion
|
|
| Applications |
|---|
- Glass fixtures and furniture
- Automotive latches
- Potting
|
|
|
|
DYMAX materials are solvent free and cure upon exposure to light. Their
ability to cure in seconds results in lower processing costs. When cured with DYMAX UV light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation. We have a library of over 3,000 adhesive formulations to choose from!
|
