 |
6-621: Multi-Cure® Adhesive for
Phenolic & Filled Plastics, Glass, and Metal |
|
|
Multi-Cure® 6-621 adhesive is
designed for rapid assembling of parts made of metal, glass, ceramic, phenolic, filled polyamide, and other substrate materials.
Multi-Cure 6-621 adhesive is specially formulated to cure
with heat in applications where shadowed areas exist.
Multi-Cure products can be cured with UV/Visible light, heat, or pre-applied activator. Visible light can penetrate through many UV-blocked and colored plastics and glasses to cure the adhesive.
Viscosity
(nominal) | Tensile at Break |
Substrates | Packages Sizes Available* |
|---|
| 800 cP | 4,000 psi
(28 MPa) | Metals
Glass
Ceramic
Polyamide (filled/unfilled)
Phenolic plastics | 10 mL Syringe (MR)
30 mL Syringe (MR)
160 mL Cartridge
1 Liter Bottle
15 Liter Tapered Pail
|
*In Europe materials are sold in g/kg not mL/L
| Features |
|---|
- UV/Visible light curing
- Secondary heat cure
- Activator cure
- Bonds multiple substrates
- Hard and clear bonds
|
|
| Applications |
|---|
- Metal-to-glass bonding
- Coil winding
- Potting
|
|
|
|
DYMAX materials are solvent free and cure upon exposure to light. Their
ability to cure in seconds results in lower processing costs. When cured with DYMAX UV/Visible light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation. We have a library of over 3,000 adhesive formulations to choose from!
|
