 |
6-621: Multi-Cure® Adhesive for
Phenolic & Filled Plastics, Glass
and Metal |
|
|
Multi-Cure® 6-621 adhesive is
designed for rapid assembling of parts made of glass, metal, phenolic, filled polyamide, ceramic, and other substrate
materials.
Multi-Cure 6-621 adhesive is specially formulated to cure
with heat in applications where shadowed areas exist.
Multi-Cure products can be cured with UV/Visible light, heat, or pre-applied activator. Visible light can penetrate through many UV-blocked and colored plastics and glasses to cure the adhesive.
Viscosity
(nominal) | Tensile at Break | Substrates | Packages Sizes Available |
|---|
| 800 cP | 2,100 psi
(14 MPa) | Glass
Metal
Ceramic
Polyamide (filled)
Polyamide (unfilled)
Phenolic plastics | 10 mL Syringe (MR)
30 mL Syringe (MR)
170 mL Cartridge
1 Liter Bottle
15 Liter Tapered Pail |
| Features |
|---|
- UV/Visible light curing
- Secondary heat cure
- Activator cure
- Bonds multiple substrates
- Hard and clear bonds
|
|
| Applications |
|---|
- Metal-to-glass bonding
- Coil winding
- Potting
|
|
|
|
DYMAX materials are solvent free and cure upon exposure to light. Their
ability to cure in seconds results in lower processing costs. When cured with DYMAX UV/Visible light curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for maximum efficiency. DYMAX lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.
|
|
Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation. We have a library of over 3,000 adhesive formulations to choose from!
|
