Accelerators, Activators and Primers for
Industrial Cyanoacrylate and Adhesive Bonding Applications

Adhesive accelerators, adhesive activators and adhesive primers are used to increase cure speed and improve adhesion of industrial cyanoacrylate and metal bonding, plastic bonding and glass bonding adhesives. DYMAX metal bonding adhesives develop bond strengths up to 3,500 psi in 10 to 30 seconds between opaque surfaces when adhesive activator is pre-applied to metal substrates. Structural adhesives form durable bonds with adhesive activator between close fitting parts for fast metal joining, ferrite bonding, magnet bonding and motor assembly. Pacer Technology accelerators and primers promote fast fixturing of cyanoacrylates. Applications include tacking, bonding speaker cones, plastic assembly and bonding metal and ceramics.

  • Increase strength of bonded substrates
  • Improve adhesion
  • Fixture in seconds

Accelerators / Primers / Activators Applications Features RoHS
Pacer Technology® Cyanoacrylate Adhesive Accelerators
Premium Acetone Accelerator For use with MR Series cyanoacrylates for metals and ceramics; ideal for bonding speaker cones Non-ODC; promotes fast fixture of cyanoacrylates with viscosities 40 cP and higher; safe for use on metals, ceramic, wood, some thermosetting plastics and rubber; increases gap filling capability; instantly cures cyanoacrylate adhesive when post-applied

Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC & 2003/11/EC
Premium Alcohol Accelerator For use with MR series cyanoacrylates in tacking applications Non-ODC; especially developed for use on thermoplastic materials; increases gap filling capability; speeds fixture time of all cyanoacrylate adhesives; best pre-applied to surface to be bonded
Pacer Technology® Adhesive Primer
Poly Primer II For use with MR series cyanoacrylates for bonding plastics and olefinic materials Clear liquid; one year shelf-life

Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC & 2003/11/EC

DYMAX Activator
WIPE-ON® 501-E Used with DYMAX adhesives for increasing bond strength to metal, plated metal, ceramic and glass substrates Strong structural bonds; fixtures in 10-20 seconds; no solvent flash-off time

Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC

DYMAX is an authorized distributor of Pacer Technology products.
accelerator Max says if you don't see an adhesive that suits your application, call DYMAX Applications Engineering for a recommendation.
We have a library of over 3,000 adhesives formulations to choose from!

DYMAX Corporation  |  318 Industrial Lane  |  Torrington, CT 06790  |  ISO 9001:2000 Certified
Phone: (860) 482-1010  |  Fax: (860) 496-0608  |  E-mail: info@dymax.com
©2007 DYMAX Corporation  |  Search Engine Optimization by Service Internet Solutions
69.20.85.128