Get Cool, Consistent Visible Light Curing with DYMAX BlueWave™ LED Spot Lamp System

The BlueWave™ LED visible light, high-intensity spot curing system offers many advantages over traditional UV spot curing systems including... no bulbs to change, cool cures, no warm-up, and constant intensity for thousands of hours. The BlueWave™ LED generates light using an array of surface mount LEDs (Light Emitting Diodes) instead of traditional metal halide or mercury bulbs. The LEDs produce visible light energy in a relatively narrow wavelength band... Find out more>>>

When the Job Calls for 180° Curing,
the SideCure™ Conveyor System is the Equipment You Need!

The DYMAX UVCS SideCure™ conveyor system is designed for light curing DYMAX adhesives and coatings from the left, right, and/or top. The SideCure conveyor can be outfitted with up to eight DYMAX 5000-EC light curing flood lamps. The conveyor’s 12" wide belt and 7.5" vertical clearance, with 5" high side-curing capability, allows for the curing of large parts and makes the SideCure a very versatile UV curing solution. Learn more>>>

Advancing the Development of Light and Moisture Cure Conformal Coatings with
Dual-Cure™ 9481

Historically, light-cured conformal coatings have been most successful in applications with no or minimal shadowing. Shadow areas, which can inhibit the access of light, have the potential to hold or trap the conformal coating and perhaps limit the light exposure of the materials. Typically, it was necessary to add the ability to thermally cure a conformal coating in order to cure in light-blocked areas. DYMAX Dual-Cure™ 9481 is a step forward... Read more>>>

QUESTION of the QUARTER:

Q: Are there masking products that can provide reliable protection during a plating process?

R: Yes. DYMAX has a line of SpeedMask® light curable resins which can provide reliable protection in the most common plating applications such as Electroless Nickel (Ni), platinum (Pt), Chrome (Cr), gold (Au), silver and copper (Cu). Contact DYMAX Applications Engineering to discuss the details of your application.

ACCU-CAL™ 100 Radiometer Allows You to Easily Validate and Maintain Your Flood Lamp or Conveyor Light Curing Process

Consistent UV curing requires periodic monitoring of UV intensity or dose. The ACCU-CAL™ 100 radiometer from DYMAX is simple to operate and offers repeatable measurement of UV light. The ACCU-CAL™ 100 can measure UV light up to 10 W/cm² emitted from stationary flood curing lamps or lamps used in conveyorized processes. This radiometer measures both intensity (measured in mW/cm²) and total energy (measured in mJ/cm²), providing the operator with more information regarding their UV curing process. Read more>>>

UPCOMING EVENTS:

UV & EB May 5-7, 2008
McCormick Place, Chicago, IL
Booth 625

MD&M East June 3-5, 2008
Jacob Javits Center, New York, NY
Booth 2113

SurFin June 17-18, 2008
Indiana Convention Center, Indianapolis, IN
Booth 905

To continue receiving Light Lines e-mail newsletters, please add newsletter@dymax.com to your address book