Edge-Carry UV Curing Conveyor
Not Available in Europe
The Dymax Edge-Carry series of conveyors is designed for efficient curing of UV and/or visible light-sensitive adhesives, inks, and coatings. These conveyors can be outfitted with a variety of lamp configurations to address a variety of application specific requirements. They offer complete shielding from UV light and consistent cure times. Configuration options allow flexibility when defining intensity requirements to keep operating costs to a minimum. Standard height clearance is 0.75" across the entire 18" width, which is ideal for low profile parts such as PCBs, and up to 6 inches across a 13.75" width, which can be increased to either 8" or 12" with optional risers installed.
- Complete UV shielding
- Controlled and consistent cure times
- Adjustable width to 18"
- Adjustable lamp-to-part distance
- Built-in variable speed exhaust fan and stack
- Can be outfitted with either Dymax EC series or Fusion lamps
- Accurate digital speed control with readout
- Bench-top conveyor
Choosing the Right Lamp(s) for Your Edge-Carry Conveyor
Edge-Carry series conveyors can be outfitted with Dymax 5000-EC, 2000-EC, and 1200-EC lamps, or Fusion F300 lamps. Edge-Carry lamps are sold separately.
These lamps provide moderate intensity (~200 mW/cm2) over a 6" x 6" (approximate) curing area. Their 400-Watt auto-switching power supplies accept 90 to 264 Volts AC and 47 to 63 Hz. With normal use, 5000-EC bulbs will retain 90% of their original intensity after 1,000 hours. 5000-EC lamps are recommended for small-to-medium throughput bonding applications. For faster or more tack-free cures, Fusion F300 lamps are recommended.
|Edge-Carry UV-Light Curing Conveyor Systems Product Bulletin|
|Edge-Carry UV Curing Conveyor Systems Operations Manual|
|Lit010A: Guide to Selecting and Using Dymax UV Light Curing Systems|
Take advantage of the opportunity to evaluate our light curing systems for two weeks free of charge through our Try-and-Buy program.
|UVCS 5000, 1200/2000 EC, and Fusion F300 Lamp Specifications and Features|
|Maximum Chain Spacing||18"||18"|
|Number of Lamps||1*||2*||2||4||1*||1*||1*||2|
CM = center mounted
FW = full width
|Width of Illuminated Area||6"||12"||9"||9"||6"||12"|
|Maximum UVA Intensity
|200 mW/cm2||100 mW/cm2||400 mW/cm2||2,500 mW/cm2|
|Maxiumu UVA Energy
(320-390 nm) @ 5 fpm (J/cm2)
with Crates (lbs.)
(feet per minute)
|1-32 fpm||1-32 fpm||1-32 fpm|
|Voltage (VAC)||115V||208-240V||115V||208-240V||115V||208-240V||115V||208-240V||115 or 208-240V||208-240V|
*These conveyors have center-mounted lamps that are supplied with removable guides to channel parts into middle 6" of conveyor.
**These bulbs are primarily designed for curing UV inks and cationic epoxies.
Images & Diagrams
Edge-Carry UV Curing Conveyor
Dymax Edge-Carry series conveyors can be outfitted with one, two, or four 5000-EC lamps as shown below.
One 5000-EC lamp center mounted
Two 5000-EC lamps center mounted
Two 5000-EC lamps full-width mounted
Four 5000-EC lamps full-width mounted